
NVT : NV-ET1801
Description
The NVT Model NV-ET1801 TBus PoE+ Transmitter is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded Twisted Pair cable. These transmitters are extremely simple to use, with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/quality/activity for RJ45 and TBus ports.
The NV-ET1801 TBus Ethernet Transmitter is backed by NVT’s award winning customer support, Limited Lifetime Warranty and advance replacement.
Features
NV-ET1801 features include:
- Transmits 10/100/PoE+ BaseT, over coax 8,000.0' (2,438.4m) over RG-59U; 2,000.0' (609.6m) over 2-wire/UTP; 1,300.0' (396.2m) over shielded twisted-pair 1
- Use with either the NV-ER1804 (4-port), the NV-ER1808i (8-port), or the NV-ER1816i (16-port) Ethernet receivers
- Powers PoE, PoE+, or high power PoE cameras (or other PoE devices), up to 50W
- Easy configuration, no PC required
- Status LEDs include: power (blue), link data (green), link quality (red/amber/green), and RJ-45 PoE (green)
- Supports all networking protocols (UDP, TCP/IP, HTTP, Multicast, and more)
- Advanced 128-bit AES encrypted transmission and PoE+ power technology
- Built-in transient protection; industrial temperature range
- UL-Listed to IEC/UL 60950-1
- Complies with FCC part 15B limits
Specifications
Connectivity | RJ45, auto-crossover |
Wire Type | 4-pair CAT5 or better |
Distance | Up to 328' (100 m) |
Speed | 10/100 BaseT, half/full duplex, auto-negotiation auto MDI/MDIX cross-over |
Latency | 3 ms |
Data | 200 Mb/s useable bandwidth per network. Example: 64 Mp cameras, all sharing a TBus network, each sending a 3.9 Mb/s video stream. |
Power Output | This PSE (Power Sourcing Equipment) supports PDs (Powered Devices) that are compatible with IEEE 802.3af/at, or PDs that draw up to 50 W. For maximum power/distance, PoE Power appears on all 8 RJ45 pins, and are current-protected and transient-protected. 1 |
Resources & Documents
nv-et1801.pdf | Datasheet |