Supplying Wholesale Markets • OEM Solutions • Extensive Product Range

FOR-A : FT-ONE-OPT

Full 4K ResolutionUltra High Speed Camera with Fiber I/O (Requires FT-1BS)

By: FOR-A

FOR-A Hanabi Audio Video Equipment

Video and Audio Systems for Broadcast Post-Production, and Professional Video

Description

The FT-ONE-OPT world’s first high-speed camera with fiber I/O designed for super-slow-motion acquisition at 4K resolution up to 900 frames per second (fps). The FT-ONE-OPT incorporates the groundbreaking FT1-CMOS, a global shutter CMOS color sensor. The FT-ONE-OPT CMOS was developed by FOR-A to provide superior resolution and sensitivity. RAW material is recorded at high speed to the internal RAM memory, which holds nearly 10 seconds of 4K content shot at 900 fps. For convenience, material can then be transferred to optional internal SSD cartridges. Unleash your creativity with this unprecedented innovation in super-slow-motion video at 4K resolution.

Features

FT-ONE-OPT features include:

  • Can power the FT-ONE-OPT (max. distance: 1 km)
  • Gigabit Ethernet connection
  • Also carries genlock signals
  • Intercom for broadcast scenarios or emergencies
  • Switchable output: VF OUT, RET 1/2

Specifications

 

 

FT-ONE

FT-ONE-OPT

Camera Section

Sensor

FT1-CMOS

Effective resolution

4096 × 2304 (4096 × 2160 DCI-compliant)

Sensor size

Super 35 mm-equivalent

Color filter

RGB Bayer

Shutter mechanism

Global shutter

Color depth

12bit

Sensitivity

ISO 640

Dynamic range

11 STOPS

Shutter speed

1/frame rate to 1/50,000 sec.

Lens mount

PL mount

Recording Section

Frame rate/recording time

See table below

Partitioning

1 to 16 spaces

Trigger method

START, CENTER, END

Pre-roll function: Adjustable playback position

Trigger signal input

Buttons on camera, remote control

SSD Cartridge
(FT-ONE2T)

Capacity

Approx. 2 TB (accepts two 2 TB cartridges, for a total of 4 TB)

Recording time

Equivalent to 84 sec. of RAW material per cartridge at 900 FPS

Transfer from internal memory

1,000 frames in approx. 45 sec.

Cartridge switching

Hot-swappable (unused cartridge only)

Video settings

Gain

Digital gain: 0dB, 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB

Analog gain: 0dB, 3dB, 6dB, 9dB, 12dB

White balance

PRESET:3200K, 5600K, 6500K, 9300K

AUTO WHITE: Semiautomatic correction, by shooting a white subject

USER A / USER B: User profiles A/B

Pedestal

Black level set via R, G, B, Master

Linear matrix color correction

RG, RB, GR, GB, BR, and BG

12-axis color correction

R, R-Ye, Ye, Ye-G, G, G-Cy, Cy, Cy-B, B, B-Mg, Mg, and Mg-R

Gamma

γ1, γ0.45, γ0.50, HDTV, CINEMA

Knee

Knee point and Knee slope setting

Enhancement

On/Off, horizontal (H), vertical (V), Coring

Video Output

4K video output

3G-SDI (Level-A) × 4 (quad output of 3840 x 2160 video signals)

Output formats: 1080/59.94p, 1080/50p

VF/auxiliary output

HD-SDI x 2 (VF output x 1, AUX output x 1)
(Downconverted signals of 4K material, with menus and markers layered on VF output)

HD-SDI x 2 (VF output x 1 (selectable from VF, RET1, or RET2), AUX output x 1)

Output formats: 1080/59.94i, 1080/50i

Return output

-

HD-SDI × 2 (RET 1, RET 2)*1

Genlock input

BB: NTSC: 0.429 Vp-p / PAL: 0.45 Vp-p or Tri-sync: ±0.3 Vp-p x 1

Genlock modes

Internal or external sync (BB or Tri-sync)

External Interfaces

Ethernet

10/100/1000Base-T/TX x 1 (for remote control unit)

Iris control

12-pin D-sub (female), manual/auto (auto control will be supported in the future)

Multi synced shooting/playback

Supported with a coax cable (5C-FB) (to be supported in the future)

GPI-OUT

-

Terminal (R, G TALLY)

Intercom

-

2 channels (Clear-Com, RTS, 2W, 4W)

General Specifications

Temperature

0°C to 40°C

Humidity

30% to 85% (no condensation)

Power

+12 V DC to +17 V DC (battery or external power supply)

+ 17 V DC (dedicated external power supply)/+ 17 V DC (supplied by base station)

Power consumption

Approx. 160 W (Full option: 180 W)

Dimensions

232 (W) x 294 (H) x 393 (D) mm (excluding protrusions)

232 (W) × 294 (H) × 487 (D) mm (excluding protrusions)

Weight

7.5 kg (fully equipped with options: 8.6 kg)

Other Specifications

Accessories

Operation manual, dedicated AC adapter

Options

FT-1RU/FT-1RUA Remote Control Unit

FT-1RCP/FT-1RCP-J Remote Control Panel

FT-ONE2T SSD cartridge (approx. 2 TB), FT-ONE-1TL Lowcost SSD cartridge (approx.1 TB)

FT-1CDS Cartridge Docking Station

FT-1READ RAW→DPX converter

-

FT-1BS Fiber-Optic Base Station

Resources & Documents

ft-one_en_lr.pdf Datasheet