DigitalMedia 8G Single-Mode Fiber Receiver & Room Controller 200
By: Crestron
The World’s Leader for Advanced Home, Campus & Building Control Automation Solutions
Crestron : DM-RMC-200-S2
Description
The DM-RMC-200-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® SM Fiber receiver, video scaler, audio amplifier, and control interface, providing a single HDMI® output along with speaker and line level audio, plus Ethernet, USB HID, and a variety of control ports. Built-in scaling enables the connected display to handle any video resolution up to HD 1080p or WUXGA. Its compact, low-profile design allows the DM-RMC-200-S2 to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using one single-mode fiber strand.[1]
Features
DM-RMC-200-S2 features include:
- DigitalMedia 8G™ Single-Mode Fiber receiver, high-definition scaler, audio amplifier, and display controller
- Connects to a DM® switcher or transmitter over one single-mode fiber strand [1]
- Supports cable lengths up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber [1]
- Provides one HDMI® or DVI display output [2]
- Handles any video resolution from standard NTSC 480i or PAL 576i, to HD 1080p60 w/Deep Color
- Handles any computer resolution from VGA to UXGA/WUXGA
- Scales the signal to match the native resolution of virtually any digital video display or computer monitor up to 1080p or WUXGA
- Provides intelligent frame rate conversion
- Includes content-adaptive noise reduction
- Allows motion-adaptive de-interlacing or interlacing
- Allows adjustable overscan or underscan up to 7.5%
- Provides automatic 3D to 2D signal conversion [3]
- Automatically passes 3D video without scaling to 3D capable displays [3]
- Supports left/right eye steering for dual-projector 3D setups [3]
- Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3, or 4x4 video wall capability [7]
- Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
- Provides a stereo analog line-level audio output with volume control [5]
- Allows extraction of stereo 2-channel audio signals [5]
- Includes a built-in 30 Watt stereo amplifier [5]
- HDCP compliant
- Provides a 10/100 Ethernet LAN connection
- Enables device control via CEC, IR, RS-232, and Ethernet
- Provides two relay control ports and two contact sensing inputs
- Enables USB HID signal extension for a local keyboard/mouse
- Compatible with Crestron USB over Ethernet Extenders [6]
- Allows quick, easy setup and diagnostics
- Low-profile design mounts to a 2-gang US, UK, or European wall box
- Includes mounting bracket with integral power pack holder
- Universal power pack included
Specifications
| Video | ||
| Scaler | HD video scaler, motion-adaptive deinterlacer, interlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion[3], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing (2x2, 3x2, 3x3, 4x3, 4x4)[7] | |
| Input Signal Type | DM 8G® SM Fiber (DigitalMedia™ over one single-mode fiber optic strand)[1] | |
| Output Signal Types | HDMI®, DVI[2] | |
| Formats | DM 8G SM Fiber & HDMI w/Deep Color & 3D[3], DVI, HDCP content protection support | |
| Input Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
| Input Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
| Scaler Output Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz[8], 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz[8], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz[8], 1400x1050@60Hz[8], 1440x900@60Hz[8], 1600x900@60Hz[9], 1600x1200@60Hz, 1680x1050@60Hz[8], 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz[9], 2048x1152@60Hz[9] | |
| Scaler Output Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30) | |
| Pass-Thru Output Resolutions | Matched to input | |
| Audio | ||
| Input Signal Type | DM 8G SM Fiber | |
| Output Signal Types | HDMI, analog stereo (speaker and line level)[5] | |
| Formats, HDMI | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM | |
| Formats, Analog | Stereo 2-Channel[5] | |
| Digital-To-Analog Conversion | 24-bit 48 kHz | |
| Performance (analog) | Amplifier Output Power: 15 Watts per channel at 8 Ohms; Frequency Response: 20Hz to 20kHz ±0.5dB (line), 20Hz to 16kHz ±3dB (speaker); S/N Ratio: >95dB (line), >75dB (speaker) 20Hz to 20kHz A-weighted; THD+N: <0.005% (line), <0.3% (speaker) @ 1kHz; Stereo Separation: >90dB (line), >60dB (speaker) |
|
| Volume Gain Range (analog) | -80dB to 0dB | |
| Communications | ||
| Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
| USB | Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[6] | |
| RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking | |
| IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud | |
| DigitalMedia | DM 8G SM Fiber, HDCP, EDID, CEC, Ethernet | |
| HDMI | HDCP, EDID, CEC | |
| NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI sink and a control system | ||
| Connectors – Bottom | ||
| DIG IN | (1) 2-pin 3.5mm detachable terminal block; Digital/contact closure sensing input; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k Ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band |
|
| HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] |
|
| USB HID | (1) USB Type A female; USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device |
|
| COM | (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support |
|
| IR 1 – 2 | (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
|
| Connectors – Top | ||
| AUDIO OUT R, L (Speaker) | (2) 2-pin 5mm detachable terminal blocks; Left & Right speaker-level audio outputs[5]; Paralleled with rear panel AUDIO OUT connectors; Wire Size: Connector accepts 12 AWG maximum; Output Power: 15 Watts per channel at 8 Ohms |
|
| AUDIO OUT R, L (Line) | (2) RCA female; Stereo unbalanced line-level audio output[5]; Output Level: 2 Vrms maximum; Output Impedance: 100 Ohms nominal |
|
| DM IN SMF/LC | (1) LC female optical fiber connector; DM 8G Single-Mode Fiber input; Connects to DM 8G SM Fiber output of a DM switcher, transmitter, or other DM device via CRESFIBER8G-SM single-mode fiber optic cable[1] |
|
| LAN | (1) 8-wire RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port |
|
| 24VDC 2.0A MAX | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2420RU power pack included |
|
| Connectors – Rear | ||
| G | (1) 6-32 screw, chassis ground lug | |
| AUDIO OUT L, R (Speaker) | (2) 2-pin 5mm detachable terminal blocks; Left & Right speaker-level audio outputs[5]; Paralleled with top panel AUDIO OUT (Speaker) connectors; Wire Size: Connector accepts 12 AWG maximum; Output Power: 15 Watts per channel at 8 Ohms |
|
| RELAY 1 – 2 | (1) 4-pin 3.5mm detachable terminal block comprising (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
|
| DIG IN | (1) 2-pin 3.5mm detachable terminal block; Digital/contact closure sensing input; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k Ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band |
|
| Controls & Indicators | ||
| PWR | (1) green LED, indicates operating power supplied via local power pack | |
| DM LINK | (1) green LED, indicates DM link status | |
| VIDEO | (1) green LED, indicates video signal presence and lock status | |
| USB HID | (1) green LED, indicates a valid device connection and activity on the USB HID port | |
| SETUP | (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup | |
| RESET | (1) miniature recessed pushbutton, for hardware reset | |
| DM IN (Top) | (1) green LED, indicates DM link status | |
| LAN (Top) | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
| Power Requirements | ||
| Power Pack | 2 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included |
|
| Environmental | ||
| Temperature | 32° to 104°F (0° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | Power amp off, no relay or USB loads: 60 BTU/Hr; Power amp on, with relay and USB loads: 80 BTU/Hr (maximum) |
|
| Enclosure | ||
| Chassis | Metal, black finish, vented sides and front | |
| Mounting | Mounts to a 2-gang electrical box, 2-Gang UK (BS 4662) electrical box, or 2-Gang European (DIN 49073) electrical box; bracket includes holder for the included power pack | |
| Dimensions | ||
| Height | 7.92 in (202 mm) | |
| Width | 10.83 in (275 mm) with mounting bracket | |
| Depth | 1.73 in (44 mm) with mounting bracket | |
| Weight | ||
| 3.20 lb (1.45 kg) including bracket and power pack | ||
Resources & Documents
| dm-rmc-200-s2.pdf | Datasheet |