IR Gateway, Flush Mount
By: Crestron
The World’s Leader for Advanced Home, Campus & Building Control Automation Solutions
Crestron : C2N-IRGW-F
Description
The C2N-IRGW-F IR Gateway is a 1-way infrared receiver for Crestron IR wireless handheld remotes and touchpanels. It is also compatible with any third-party IR remote utilizing the RC5 command set.
The C2N-IRGW-F is designed to install flush into any drywall or ceiling tile surface. Its visible face consists of a smoked plastic lens measuring 1-1/2 inch diameter. The C2N-IRGW-F is a Cresnet device compatible with any 2-Series control system.
Specifications
| IR Wireless | ||
| IR Frequency | 36 to 38 kHz IR | |
| Formats | Crestron format, RC5 | |
| Range | Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength | |
| Connections | ||
| NET | ~10 inch (~25 cm) 4-wire pigtail; Connects to Cresnet control network |
|
| LED Indicators | ||
| (1 red) Indicates IR signal reception, Cresnet network communication, and setup/update functions | ||
| Controls | ||
| (1) Recessed miniature pushbutton for setup | ||
| Power Requirements | ||
| Cresnet Power Usage | 1 Watt (0.042 Amps @ 24 Volts DC) | |
| Environmental | ||
| Temperature | 41° to 104°F (5° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Cylindrical plastic, drywall or ceiling tile mountable in a 1 inch (2.54 cm) diameter round hole | ||
| Dimensions | ||
| Diameter | 1.50 in (3.81 cm) | |
| Depth | 2.19 in (5.54 cm) | |
| Weight | ||
| 0.9 oz (25.52 g) | ||
Resources & Documents
| c2n-irgw-f.pdf | Datasheet |