450 Watt Power Supply for Crestron Shades
By: Crestron
The World’s Leader for Advanced Home, Campus & Building Control Automation Solutions
Crestron : CSA-PWS450
Description
The CSA-PWS450 is a 450 Watt power supply designed for use with Crestron shade motors. Power is supplied from 6 channels, each protected by a self resetting thermal fuse and a slow-blow cartridge fuse. By supplying 75 Watts per channel, the CSA-PWS450 is capable of powering up to 12 CSM-QMT50 shade motors.
Specifications
| Load Rating | ||
| Per Segment | 75 Watts @ 24 Volts DC | |
| Total Load Rating | 450 Watts (75 W x 6 segments) @ 24 Volts DC | |
| Load Protection | Self resetting thermal fuse and a replaceable 4A slow-blow fuse per segment | |
| Power Requirements | ||
| Line Power | 100-120 Volts AC, 50/60 Hz | |
| Connections | ||
| SEGMENT A-F | (12) 4-pin detachable terminal blocks comprising (2) paralleled Cresnet ports per each of (6) output segments; 24 Volt DC power outputs |
|
| CRESNET | (2) 4-pin detachable terminal blocks; Cresnet slave ports, paralleled; Connect to Cresnet control network, power not supplied to these connections Cresnet power output ports with data pass-through |
|
| LED Indicators | ||
| PWR | (green) indicates power supply system is enabled; Off when no power from main supply | |
| Y | (red) indicates data being transmitted; Off when data line low | |
| Z | (red) indicates data being transmitted: Off when data line low/no data on cresnet | |
| A-F | (green) indicates 24V DC power presetn at each segment output; Off when fuse blown | |
| Enclosure | ||
| Wall mount, steel (inside use only) | ||
| Environmental | ||
| Temperature | 32° to 104°F (0° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Dimensions | ||
| Height | 10.20 in (259 mm) | |
| Width | 14.92 in (277 mm) | |
| Depth | 5.47 in (139 mm) | |