1-Ch. Touchscreen Wireless Focus Ctrl Lens Drive Sys. for Broadcast/Cinema/DSLR Lenses
|
|
By: Varizoom
Professional Camera Cranes, Jibs, and Controls
|
The VariZoom VZTOC-F1 Wireless Follow Focus System is comprised of a handheld control unit, a wireless receiver, and a motorized drive gear. VariZoom also supplies a universal gear set, which includes four interchangeable gears for use with virtually any film or video lens. The control unit and receiver support wireless distances of up to 1000' with line of sight. The control unit and receiver can also operate as a wired system, which can be useful for situations where there is RF interference.
The control knob features fluid drag and a touchscreen with an intuitive GUI for adjusting all parameters. There is also an iris and focus marking panel with an LED backlight for improved visibility. The lens drive motor uses a single rod clamp for mounting onto a 19mm or 15mm rod. In addition, the motor system features auto and manual calibration for hassle-free setup.
VZTOC-F1 features include:
- Can be configured as a wired system to avoid RF interference
- Knob, slider, and lens range limits can be set manually
- The control unit and receiver both have LED wireless signal strength indicators
- Motor response can be adjusted to ensure smooth operation
- Lens drive motors can auto calibrate when used with lens that have hard stops
- Manual calibration for use with lens that have no hard stops
- Backlash compensation setting for variation in lenses
- Power compensation accommodates lenses with more or less resistance to rotation
- One touch buttons for "Open Iris" and "Reset All"
- Rechargeable Canon BP type Li-Ion battery and battery monitor gauge
- Stainless steel eyelet for attaching a lanyard
- Gear set: 32DP/0.8M (film), 0.6M (Fujinon), 48DP/0.5M (Canon), 64DP ("iris")
- Waterproof, hard-sided carrying case for all components
- Upgrade packages available for up to 3 channels/lens drive motors
- Made in the U.S.A.
Wireless Range |
Up to 1000' w/ line of sight |
Hand Unit Connector |
Lemo 1B 8pin (comm) |
Receiver Connectors |
Lemo 1B 8pin (comm), 4pin (power in), 7pin (motor); Lemo 0B 3pin for record start/stop |
Battery Life |
Approx. 5 hours, longer w/ extended batteries |
Warranty |
2 years parts/labor |
Components |
1-ch hand unit, 1 motor, 1-ch receiver, 2 antennae, universal gear set (0.6M Fujinon, 48DP/0.5M Canon, 32DP/0.8M Film, 64DP "Iris"), Battery, Charger, Customer-Specified Receiver Power Cable, Hard Case |
System Wt. in Case |
8.2 lbs |
Case Dim. |
15.5" x 12" x 7" |
Hand Unit Wt. |
22.4 oz |
Hand Unit Dim. (no antenna) |
4.1" W x 7.65" L x 3.2" D |
Receiver Wt. |
9.1 oz |
Receiver Dim. (no antenna) |
3.85" L x 2.5" W x 1.5" D |
Antenna Dim. Add-On |
1.85" L |
Motor Wt |
10.4 oz |
Motor Dim. |
5.135" L x 2.43" W x 1.05 D ; Cable = 18" L |
Charger Wt./Dim. |
3.1 oz / 4.5" x 2.8" x 1.1" |
Battery Wt. |
3.3 oz |
Returns |
20% restocking fee within 30 days of purchase |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.