Lectrosonics : SPNDNT
Description
The SPNDNT Dante Network Processor from Lectrosonics is a DSP mixer and processor for Dante networked ASPEN equipment. It features 32 digital inputs and outputs via its dual gigabit Ethernet ports. It provides automatic mixing, gain control, and delay to time align audio from different sources.
The unit can both generate clock signal and serve as a clock master, or function as a slave to the clock in another Dante unit. The SPNDNT is network plug and play and will automatically recognize other units on the network once connected. It can be connected to a secondary network for redundancy, providing a failsafe if the primary network fails.
Features
SPNDNT features include:
- Connects Dante™ networked audio with ASPEN processors
- Up to 32 inputs and 32 outputs from the Dante network operate as native inputs and outputs in the
ASPEN digital matrix - Low latency, tightly synchronized transport of uncompressed audio over IP networks using
off the shelf switches - Simplified configuration management includes easy to use Dante features like automatic device discovery
and plug and play networking - Gigabit Ethernet transport
- AVB Support
- Redundancy via secondary network
Specifications
| Digital Inputs | 32 via Ethernet |
| Digital Outputs | 32 via Ethernet |
| Monitor Output | 1x 1/4" (6.35 mm) headphone jack Signal Source: Any of the 48 final mixes Output Power: 50 mW (<50 Ω impedance recommended) |
| Matrix Access | 32 inputs from Dante matrix 48 mixes in ASPEN matrix |
| Input Processing | Gain: -69 to 20 dB in 1 dB increments Delay: .5 to 100 ms in .5 ms increments |
| Output Processing | Gain: -69 to 20 dB in 1 dB increments Delay: .5 to 250 ms in .5 ms increments |
| Crosspoint Mixing Modes | Auto Direct Override Background Phantom |
| Signal Generator | Swept Sine: Modes: single sweep, continuous sweep Waveforms: Sawtooth (up or down), triangle Sweep Rate: Linear, logarithmic Parameters: Start frequency, stop frequency, level (dBu), sweep time (sec) White Noise: Parameter: level (dBu) Pink Noise: Parameter: level (dBu) Tone (Sine Wave): Parameter: level (dBu), frequency |
| Power Requirement | 100-240 VAC, 50/60 Hz |
| Power Consumption | 15 W |
| Dimensions (L x W x H) | 1.75 x 19.00 x 7.70" (44.4 x 482.0 x 195.0 mm) |
| Weight | 3.64 lb (1.65 kg) |
Resources & Documents
| spndnt.pdf | Datasheet |