Lectrosonics : LECTROSONICS PA8
Description
The Lectrosonics PA8 is an eight-channel, single rack space amplifier ideal for zoned, distributed loudspeaker systems. It has eight separate amplifiers within the chassis, each with an output power of 6 watts at 8 ohms or 10 watts at 4 ohms. Passive cooling and short-circuit protection ensure that the PA8 remains stable and reliable.
Features
LECTROSONICS PA8 features include:
- Single-space rack unit
- Each of the eight internal amplifiers is capabable of outputting 6 watts at 8 ohms or 10 watts at 4 ohms
- Passive cooling
- Short circuit and thermal overload protection
- Outputs are muted when the unit is turned on and off to eliminate transients
- Supports bridged and non-bridged output
- Front-panel volume control of each channel
Specifications
Output Power | 10W into 4 ohms 6W into 8 ohms 20W into 8 ohms with Bridge-Mono |
Damping Factor | Not Specified by Manufacturer |
Input Sensitivity | -2 dBu (615VRMS) Maximum |
Input Impedance | 20 k ohms |
Gain | 20 dB |
Frequency Response | Not Specified by Manufacturer |
Signal-to-Noise Ratio | 88 dB |
Total Harmonic Distortion (THD) | Less than 0.1% |
Input Connections | 8 x Line Inputs (Balanced/Unbalanced) |
Output Connectors | 8 x Speaker Outputs (Minimum 4 ohm Load Non-Bridged) |
Controls Front Panel | 1 x Power Switch 8 x Volume Controls |
Controls (Rear) | None |
Indicators | Front-Panel Power LED |
Cooling | Passive Cooling |
Power Consumption | 200W Maximum at 120VAC |
Dimensions (WxHxD) | 19 x 1.75 x 8.25" (483 x 44 x 210mm) |
Weight | 8.6 lbs (3.9 kg) |
Specialties | Short Circuit and Thermal Overload Protection |
Resources & Documents
lectrosonics-pa8.pdf | Datasheet |