Two (2) Output Power Supply/Charger w/Fire Alarm Disconnect - 12VDC or 24VDC @ 6 amp max

The Altronix eFlow6NB power supply/charger converts a 120VAC / 60Hz input to a 12VDC or 24VDC @ 6 amp output.

Available Configurations Include:

EFLOW6NB features include:

• Input 120VAC 60Hz, 3.5 amp.

• 12VDC or 24VDC selectable output.

• 6 amp continuous supply current.

• Aux. power-limited output rated @ 1 amp (unswitched).

• Over Voltage Protection.

• Filtered and electronically regulated outputs.

• Built-in charger for sealed lead acid or gel type batteries.

• Maximum charge current 1.54 amp.

• Automatic switch over to stand-by battery when AC fails.

• Transfer to stand-by battery power is instantaneous with no interruption.

• Fire Alarm Disconnect:

• Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

• AC fail supervision (form "C" contacts).

• Battery fail & presence supervision (form "C" contacts).

• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.

• Operating temperature: 0° C to 49° C ambient.

• 36.9-73.7 BTU/Hr.

• System AC input VA requirement: 420VA.

• Visual Indicators:

• AC input, DC output and Battery LED indicators.

• Additional Features:

• Short circuit and overload protection.