Two (2) Output Power Supply/Charger w/Fire Alarm Disconnect - 12VDC @ 10 amp max

The Altronix eFlow102N is a power supply/charger that converts a 120VAC 60Hz input into a single 12VDC output with a total of 10 amps max. The unit includes a unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Available Configurations Include:

EFLOW102N features include:

• 120VAC, 60Hz, 3.5 amp.

• Input fuse: 5A/250V.

• 12VDC @ 10.0 amp supply current.

• Auxiliary Power-Limited output rated @ 1 amp (unswitched).

• Over Voltage Protection.

• Built-in charger for sealed lead acid or gel type batteries.

• Maximum charge current 1.54 amp.

• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.

• AC fail supervision (form "C" contacts).

• Battery fail & presence supervision (form "C" contacts).

• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge.

• Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

• Operating temperature: 0° C to 49° C ambient.

• BTU/Hr.: 61.42 BTU/Hr.

• System AC input VA requirement: 420VA.

• Green AC Power LED indicates 120VAC present.

• AC input, DC output and Battery LED indicators.

• Additional Features:

• Short circuit and overload protection.

• Unit is complete with power supply, enclosure, battery leads and cam lock.