Power Supply/Charger w/Fire Alarm Disconnect - 12VDC or 24VDC @ 2 amp max

The Altronix eFlow3N4D is a power supply/charger that converts a 120VAC, 60Hz input into four (4) PTC protected 12VDC or 24VDC power-limited outputs.

Available Configurations Include:

EFLOW3N4D features include:

• 120VAC, 60Hz, 3.5 amp.
• Input fuse: 5A/250V.
• Four (4) PTC protected Class 2 Rated power-limited outputs.
• 12VDC or 24VDC selectable output.
• 12VDC or 24VDC @ 2.0 amp supply current.
• Outputs are rated @ 2 amp.
• Auxiliary power-limited output rated @ 1 amp (unswitched).
• Over Voltage Protection
• Maximum charge current 1.54 amp.
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
• AC fail supervision (form "C" contacts).
• Battery fail & presence supervision (form "C" contacts).
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
• Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
• Operating temperature: 0° C to 49° C ambient.
• BTU/Hr.:
• 12VDC: 12.28 BTU/Hr.
• 24VDC: 24.57 BTU/Hr.
• System AC input VA requirement: 420VA.
• Green AC Power LED indicates 120VAC present.
• AC input, DC output and Battery LED indicators.
• Short circuit and overload protection.
• Unit is complete with power supply, enclosure, battery leads and cam lock.