Call Now: 1-800-284-2288 |
(discontinued) Video Caliper, H&V-dimensions, single-turn cursor control |
By: Colorado Video
Video Instrumentation & Equipment to Analyze, Overlay, Mix, Measure, Combine, Compare, Capture, Freeze, Split, Flip and Invert Video Images. |
|
This item is DISCONTINUED. See Colorado Video model DD309CS as a suggested replacement, or contact [email protected] for an alternative.
This COLORADO VIDEO 308 Video Caliper, Video Micrometer, Video Scaler, Video Inspection Instrument, Video Image Measurement device, superimposes two vertical and two horizontal cursors onto the video display. The user can adjust the position of these cursors using front panel controls. There is a set of two controls for each direction, horizontal and vertical. The right-most control sets the distance between the cursors by moving one cursor only. The left control moves both cursors across or up and down the screen while maintaining the distance between them. This arrangement allows dimensional comparison or measurement of objects across the image without disturbing the distance between the cursors. A switch selects which dimension is shown on the 4 digit display.
Two scale adjustment controls, one each for horizontal and vertical, calibrate the meter reading for a given distance between the cursors. Calibrations must be made any time the optics or distance between the image sensor and the object under scrutiny change. These controls require a small screw driver for adjustment in order to avoid inadvertent disturbance of the calibration.
Stores Separate H and V Calibrations
3 1/2 Digit Display Reads 0000 to 1999
User Positionable Decimal Point
Desktop Style ABS Chassis
S-Video Optional (Composite Standard)
9 VAC Power (120 VAC Adapter Included in N.A.)
Also Available:
Model 308A: Video Caliper, Video Micrometer, Video Scaler, Video Based Measurement System 10-Turn Vernier Cursor Controls
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|