(discontinued) Point Grey 1/2″ CCD; color; 1384 x 1032; 16 fps; C-mount
By: Point Grey
CCD and CMOS Cameras

Point Grey : FL3-FW-14S3C-C
Description
This product has been discontinued. For an alternative, please contact [email protected]
The fully redesigned, next generation Point Grey FL3-FW-14S3C-C Flea3 camera series builds on the success of the ultra-compact Flea2 by adding new Sony image sensors to the line-up. The Flea3 offers a host of new features, including enhanced opto-isolated GPIO; an on-camera frame buffer; non-volatile user data storage; new trigger modes; and improved imaging performance.
Specifications
Resolution | 1384 x 1032 |
Frame Rate | 16 FPS |
Megapixels | 1.4 MP |
Chroma | Color |
Sensor Name | Sony ICX267 |
Sensor Type | CCD |
Readout Method | Global shutter |
Sensor Format | 1/2" |
Pixel Size | 4.65 µm |
Lens Mount | C-mount |
ADC | 12-bit |
Gain Range | 0 dB to 24 dB |
Exposure Range | 0.03 ms to >25 seconds |
Trigger Modes | Standard, bulb, skip frames, multi-exposure preset, multi-exposure pulse width, overlapped, multi-shot |
Partial Image Modes | Pixel binning, ROI |
Image Processing | Gamma, lookup table, hue, saturation, and sharpness |
Image Buffer | 32 MB |
User Sets | 2 memory channels for custom camera settings |
Flash Memory | 1 MB non-volatile memory |
Opto-isolated I/O Ports | 1 input, 1 output |
Non-isolated I/O Ports | 2 bi-directional |
Serial Port | 1 (over non-isolated I/O) |
Auxiliary Output | 3.3 V, 150 mA maximum |
Interface | FireWire 1394b |
Power Requirements | 8 to 30 V |
Power Consumption (Maximum) | <2.5 W |
Dimensions | 29 mm x 29 mm x 30 mm |
Mass | 58 grams |
Machine Vision Standard | IIDC v1.32 |
Compliance | CE, FCC, KCC, RoHS |
Temperature (Operating) | 0° to 45°C |
Temperature (Storage) | -30° to 60°C |
Humidity (Operating) | 20 to 80% (no condensation) |
Humidity (Storage) | 20 to 95% (no condensation) |
Warranty | 3 years |
Resources & Documents
flea3-datasheet-avs.pdf | Datasheet |
flea-3-start-up-manual-avs.pdf | Manual |