(discontinued) Point Grey 1/3″ CCD; color; 1288×964; 30 fps; C-mount
By: Point Grey
CCD and CMOS Cameras
Point Grey : FL2G-13S2C-C
Description
This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.
FL2G-13S2C-C At 29x29x30mm, the Point Grey Flea2 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.
Specifications
| Resolution | 1288 x 964 |
| Frame Rate | 30 FPS |
| Megapixels | 1.3 MP |
| Chroma | Color |
| Sensor Name | Sony ICX445 |
| Sensor Type | CCD |
| Readout Method | Global shutter |
| Sensor Format | 1/3" |
| Pixel Size | 3.75 µm |
| Lens Mount | C-mount |
| ADC | 12-bit |
| Gain Range | 0 dB to 24 dB |
| Exposure Range | 0.02 ms to >10 seconds |
| Trigger Modes | Standard, bulb, skip frames, multi-exposure preset, overlapped, multi-shot |
| Partial Image Modes | Pixel binning, ROI |
| Image Processing | Gamma, lookup table, hue, saturation, and sharpness |
| Image Buffer | 32 MB |
| User Sets | 3 memory channels for custom camera settings |
| Flash Memory | 512 KB non-volatile memory |
| Opto-isolated I/O Ports | 1 input, 1 output |
| Non-isolated I/O Ports | 2 bi-directional |
| Serial Port | 1 (over non-isolated I/O) |
| Auxiliary Output | 3.3 V, 150 mA maximum |
| Interface | FireWire 1394b |
| Power Requirements | 8 to 30 V |
| Power Consumption (Maximum) | <2.5 W |
| Dimensions | 29 mm x 29 mm x 30 mm |
| Mass | 58 grams |
| Machine Vision Standard | IIDC v1.31 |
| Compliance | CE, FCC, KCC, RoHS |
| Temperature (Operating) | 0° to 45°C |
| Temperature (Storage) | -30° to 60°C |
| Humidity (Operating) | 20 to 80% (no condensation) |
| Humidity (Storage) | 20 to 95% (no condensation) |
| Warranty | 3 years |
Resources & Documents
| flea2-fl2-spec-avs.pdf | Datasheet |