Point Grey : CM3-U3-50S5M-CS
Description
The Teledyne FLIR CM3-U3-50S5M-CS model leverages Sony’s Pregius global shutter CMOS technology designed to fulfill the promise of global shutter CMOS: crisp, clear, distortion-free images at high speeds. These sensors clearly outperform traditional global shutter CMOS sensors and have become a viable alternative to CCD sensors.
Features
2448 x 2048 at 35 FPS
Sony IMX264 CMOS
Global shutter
Mono
CS-mount (5 mm C-mount adapter not included)
Specifications
| Resolution | 2448 x 2048 |
| Frame Rate | 35 FPS |
| Megapixels | 5.0 MP |
| Chroma | Mono |
| Sensor Name | Sony IMX264 |
| Sensor Type | CMOS |
| Readout Method | Global shutter |
| Sensor Format | 2/3″ |
| Pixel Size | 3.45 µm |
| Lens Mount | CS-mount (5 mm C-mount adapter not included) |
| ADC | 12-bit |
| Quantum Efficiency (% at 525 nm) | 69 |
| Temporal Dark Noise (e-) | 2.29 |
| Absolute Sensitivity Threshold (y) | 4.03 |
| Saturation Capacity (e-) | 9869 |
| Dynamic Range (dB) | 70.97 |
| Gain Range | 0 dB to 48 dB |
| Exposure Range | 0.013 ms to 12 seconds |
| Trigger Modes | Standard, bulb, overlapped, multi-shot |
| Partial Image Modes | Pixel binning, ROI |
| Image Processing | Gamma, lookup table, and sharpness |
| Image Buffer | 16 MB |
| User Sets | 2 memory channels for custom camera settings |
| Flash Memory | 1 MB non-volatile memory |
| Opto-isolated I/O Ports | 1 input, 1 output |
| Non-isolated I/O Ports | 2 bi-directional |
| Auxiliary Output | 3.3 V, 150 mA maximum |
| Interface | USB 3.0 |
| Power Requirements | 5-24 V via GPIO or 5 V via USB 3.0 |
| Dimensions | 44 mm x 35 mm x 19.5 mm (case enclosed) |
| Mass | 54.9 grams |
| Machine Vision Standard | USB3 Vision v1.0 |
| Compliance | CE, FCC, KCC, RoHS |
| Temperature (Operating) | 0° to 45°C |
| Temperature (Storage) | -30° to 60°C |
| Humidity (Operating) | 20 to 80% (no condensation) |
| Humidity (Storage) | 20 to 95% (no condensation) |
| Warranty | 3 years |
Resources & Documents
| cm3-u3-50s5-spec-avs.pdf | Datasheet |