Lectrosonics : UCR100
Description
The Lectrosonics UCR100 100 system was designed to operate with the new generation of DV camcorders, offering an ultra-compact receiver and modest cost, yet preserving the performance that has become the hallmark of Lectrosonics.
The system offers 256 selectable frequencies over a 25.6 MHz band to avoid interference from local RF sources. The UCR100 receiver is highly sensitive and the matching transmitters provide a full 100mW of output power. The result is exceptional operating range and freedom from drop outs.
Features
UCR100 features include:
- Ideal for compact DV camcorders
- 256 selectable UHF frequencies
- High sensitivity for extended range
- Dual-band compandor
- Ultra rugged tempered alloy antenna
- 9 Volt battery powered
- Machined aluminum construction
- Electrostatic powder coated and anodized finish
Specifications
| Type of Receiver | UCR100 UHF Frequency agile Receiver |
| RF Carrier Frequency Range | 537.6 to 608MHz, 614 to 793.5MHz (in 10 blocks) |
| Approx. Working Range | 300' in adverse conditions 1,000' in ideal conditions |
| Overall Frequency Response | 50Hz to 18kHz (+/- 2dB) |
| Signal-to-Noise Ratio | 105dB (overall system) |
| # Of Channels | 256 per block (using 26MHz wide band) |
| Type of Outputs | 1/8" Mini connector |
| Headphone Monitoring | No |
| Power Requirements | 60mA |
| Battery Type/Approx. Life | 8 Hours with 9V alkaline battery 15 Hours with 9V lithium battery |
| Display | frequency selection is achieved via rotary dials located on the side of the unit |
| Mounting Options | Camera or Belt Mount |
| Antenna Type | 1/4 wave vertical (fixed) |
| Dimensions | (HxWxD) 3.6 x 2.4 x 0.8" (91.44 x 60.96 x 2.032mm) |
| Weight | 7.3 oz (207g)(with battery) |
Resources & Documents
| ucr100.pdf | Datasheet |