Sentech : EGE-W25
Description
The Sentech EGE-W25 remote head, high resolution, 1/4″ CCD camera series with a wiring harness between the main camera boards and the CCD board. This manufacturing method provides better reliability in applications requiring the head to be flexed or repositioned often.
Specifications
| Type | Board |
| Image Sensor | 1/4" IT Color CCD (ICX228AKB) |
| Horizontal Resolution | 480 TV Lines |
| Signal Format | NTSC and PAL |
| Frame Rate | 30fps |
| Effective Picture Element | 768 x 494 (NTSC) / 752 x 582 (PAL) |
| Vertical Frequency | 59.94Hz (NTSC) / 50.00Hz (PAL) |
| Horizontal Frequency | 15.734kHz (NTSC) / 15.625kHz (PAL) |
| Connection CCU | Wiring harness (length can vary 1 to 6 inches) |
| Sync System | Internal |
| Electronic Shutter | 1/60 ~ 1/10,000 Second |
| Fixed Shutter | Low Speed: 2FLD to 16FLD (8 Steps), High Speed: 1/60 (1/50) ~ 1/10,000 (8 Steps) |
| Minimum Illumination | 0.46 Lux @ F1.2, 20 IRE; 1.82 Lux @ F1.2, 50 IRE |
| S/N Ratio | >48 dB (AGC Off) |
| Gamma | 0.45 (DSP Adjustable) |
| AGC | On/Off (0 to 18 dB) |
| Video Output | 1.0 Vp-p, 75Ω |
| Y/C Output | 0.7 Vp-p, 75Ω |
| White Balance | Auto / Manual / Push-to-Set |
| Aperture Gain | Off/On (On has two levels- user definable) 2-bit - status output |
| Status FeedBack | 2-Bit status output |
| Negative Positive | DSP Selectable |
| Back Light | Back light compensation at electronic shutter |
| Power | Supply Voltage: 6-8V DC, Consumption: 1.92W, 240mA, Variation is CCD Dependant |
| Operating Temperature | -10°C ~ 45°C (14°F ~ 113°F) |
| Storage Temperature | -30°C ~ 60°C (-22°F ~ 140°F) |
| Dimensions | CCU: 26 (W) x 20 (H) x 60 (L) mm (1.04" x .8" x 2.4") |
| Dimension Head | CCD Head: 8mm Diameter |
| Weight | 35g (1.23 oz.) |