
Sentech : STC-33
Description
The Sentech STC-33 is a full featured, low cost, VGA, progressive scan, machine vision, board camera with a 1/3″ monochrome CCD.
The STC 33 features a full frame 60fps (at double speed) VGA output, partial scanning, triggering and reset capabilities.
Features
STC-33 features include:
|
|
|
Specifications
Resolution | VGA (0.3 MegaPixel) |
Image Sensor | 1/3" Interline CCD (ICX424AL) |
Signal Format | Monochrome Progressive Analog |
Frame Rate | 30, 60 fps |
Effective Picture Element | 659 (H) v 494 (V) |
Active Picture Element | 648 (H) x 494 (V) |
Chip Size (mm) | 5.79 (H) x 4.89 (V) |
Cell Size (um) | 7.4 (H) x 7.4 (V) |
Vertical Frequency | 29.97 / 59.94Hz |
Horizontal Frequency | 15.734 / 31.468kHz |
Pixel Clock Frequency | 12.272 / 24.545MHz |
Scanning Method | Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4), Binning, Binning Partial Scan (1/1, 1/2, 1/4) |
Sync System | Internal and External (HD/VD) Automatically |
Communication | RS232C |
Trigger Mode | Pulse Width Trigger, Edge Preset Trigger (10 Steps) |
Electronic Shutter | 1/30 ~ 1/16,000 (10 steps), 1/60 ~ 1/32,000 (10 steps) |
Minimum Illumination | 0.08 Lux @ F1.2, 20 IRE; 0.14 Lux @ F1.2, 50 IRE |
Gain | AGC/Manual (4 to 24 dB) |
S/N Ratio | 50dB (Gain 0dB) |
Gamma | 1.0 |
Lens Mount | CS Mount |
Video Output | 1Vp-p 75Ω |
Shock | 70G (3 directions, 3 times each) |
Vibration | 10G (20 to 200Hz) |
InputVoltage | DC 12V /- 10% |
Power Consumption | 1.44W, 120 mA |
Operating Temperature | -10°C ~ 45°C ( 14°F ~ 113°F) |
Storage Temperature | -30°C ~ 60°C ( -22°F ~ 140°F) |
Dimensions | 30 (W) x 30 (H) x 32 (D) mm (1.12 x 1.12 x 1.28) |
Weight | 27g (0.95 oz.) |
Resources & Documents
stc-33-avs.pdf | Spec Sheet |