Sentech : STC-83
Description
The Sentech STC-83 is a full featured, low cost, XGA progressive scan machine vision board camera with a 1/3″ monochrome CCD.
The STC 83 features a full frame 30fps XGA output, partial scanning, triggering and reset capabilities.
Features
STC-83 features include:
|
|
|
Specifications
| Resolution | XGA (0.8 MegaPixel) |
| Image Sensor | 1/3" Interline CCD (ICX204AL) |
| Signal Format | Monochrome Progressive Analog |
| Frame Rate | 30 fps |
| Effective Picture Element | 1034 (H) x 779 (V) |
| Active Picture Element | 1024 (H) x 768 (V) |
| Chip Size (mm) | 5.80 (H) x 4.92 (V) |
| Cell Size (um) | 4.65 (H) x 4.65 (V) |
| Vertical Frequency | 29.18 Hz |
| Horizontal Frequency | 23.228 kHz |
| Pixel Clock Frequency | 14.75 MHz |
| Scanning Method | Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4), Binning, Binning Partial Scan (1/1, 1/2, 1/4) |
| Sync System | Internal and External (HD/VD) Automatically |
| Communication | RS232C |
| Trigger Mode | Pulse Width Trigger, Edge Preset Trigger (10 Steps) |
| Electronic Shutter | 1/30 ~ 16,000 (10 steps) |
| Minimum Illumination | 0.08 Lux @ F1.2, 20 IRE; 0.17 Lux @ F1.2, 50 IRE (Gain ON) |
| Gain | AGC/Manual (4 to 24 dB) |
| S/N Ratio | 50dB (Gain 0dB) |
| Gamma | 1.0 |
| Lens Mount | CS Mount |
| Video Output | 1Vp-p 75Ω |
| Shock | 70G (3 directions, 3 times each) |
| Vibration | 10G (20 to 200Hz) |
| InputVoltage | 12Vdc /- 10% |
| Power Consumption | 1.56W, 130mA |
| Operating Temperature | -10°C ~ 45°C ( 14°F ~ 113°F) |
| Storage Temperature | -30°C ~ 60°C ( -22°F ~ 140°F) |
| Dimensions | 30 (W) x 30 (H) x 32 (D) mm (1.12 x 1.12 x 1.28) |
| Weight | 27g (0.95 oz.) |
Resources & Documents
| stc-83-avs.pdf | Spec Sheet |