Sentech : STC-A83A
Description
The Sentech STC-A83A is a 1/3″, monochrome, progressive scan, cube camera with 1024 x 768 resolution. This series features a XGA sensor with a scan rate of 30fps, analog output and variable integration shutter trigger.
Features
STC-A83A features include:
|
|
|
Specifications
| Resolution | XGA (0.8 MegaPixel) |
| Image Sensor | 1/3" Interline CCD (ICX204AL) |
| Signal Format | Monochrome Progressive Analog |
| Frame Rate | 30 fps |
| Effective Picture Element | 1034 (H) x 779 (V) |
| Active Picture Element | 1024 (H) x 768 (V) |
| Chip Size (mm) | 5.80 (H) x 4.92 (V) |
| Cell Size (um) | 4.65 (H) x 4.65 (V) |
| Vertical Frequency | 29.59 Hz |
| Horizontal Frequency | 23.23 kHz |
| Pixel Clock Frequency | 29.5 MHz |
| Scanning Method | Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4, Variable), Binning, Binning Partial Scan (1/1, 1/2, 1/4, Variable) |
| Sync System | Internal / External |
| Trigger Mode | Edge Preset: V Reset, Non-Reset; Pulse Width Trigger: V Reset, Non-Reset |
| Shutter Speed | Dip Switch: OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/12,000, Communication: OFF; 1/2 to 1/100,000 sec. (Variable at every H and Clock) |
| Minimum Illumination | 0.08 Lux @ F1.2, 20 IRE; 0.17 Lux @ F1.2, 50 IRE |
| Gain | Manual (0 to 27 dB) |
| S/N Ratio | 56dB (Gain 0dB) |
| Gamma | 1.0 / 0.45 |
| Lens Mount | C-Mount |
| Video Output | 1 V p-p, 75Ω DC Coupling (0V Clamp) |
| Shock | 70G (3 directions, 3 times each) |
| Vibration | 10G (20 to 200Hz) |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy in H and V direction: /- 0.31mm |
| InputVoltage | 12V DC |
| Power Consumption | < 1.8W, 150mA |
| Operating Temperature | -5°C ~ 50°C ( 23°F ~ 122°F) |
| Storage Temperature | -30°C ~ 65°C ( -21.9°F ~ 149°F) |
| Dimensions | 28 (W) x 28 (H) x 46.3 (D) mm (1.1 x 1.1 x 1.8) |
| Weight | 52g (1.8 oz.) |
Resources & Documents
| stc-a83a-avs.pdf | Spec Sheet |