Sentech : STC-A152A
Description
The Sentech STC-A152A is a 1/2″, monochrome, progressive scan, cube camera with 1360 x 1024 resolution. This series features a SXGA sensor with a scan rate of 19fps, analog output and variable integration shutter trigger.
Features
STC-A152A features include:
|
|
|
Specifications
Resolution | SXGA (1.3 MegaPixel) |
Image Sensor | 1/2" Interline CCD (ICX205AL) |
Signal Format | Monochrome Progressive Analog |
Frame Rate | 15, 19 fps |
Effective Picture Element | 1392 (H) x 1040 (V) |
Active Picture Element | 1360 (H) x 1040 (V) |
Chip Size (mm) | 7.60 (H) x 6.20 (V) |
Cell Size (um) | 4.65 (H) x 4.65 (V) |
Vertical Frequency | 15.28 (15fps) / 19.3 (19fps) Hz |
Horizontal Frequency | 15.998 (15fps) / 20.57 (19fps) kHz |
Pixel Clock Frequency | 28.6363 (15fps) / 36.8181 (19fps) MHz |
Scanning Method | Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4, Variable), Binning, Binning Partial Scan (1/1, 1/2, 1/4, Variable) |
Sync System | Internal / External |
Trigger Mode | Edge Preset: V Reset, Non-Reset; Pulse Width Trigger: V Reset, Non-Reset |
Shutter Speed | Dip Switch: OFF; 1/200; 1/500; 1/1,000; 1/2,000; 1/4,000; 1/8,000; 1/20,000 second, Communication: OFF; 1/2 to 1/100,000 sec. (Variable at every H and Clock) |
Minimum Illumination | 0.1 Lux @ F1.2, 20 IRE; 0.16 Lux @ F1.2, 50 IRE |
Gain | Manual (0 to 27 dB) |
S/N Ratio | 56dB (Gain 0dB) |
Gamma | 1.0 / 0.45 |
Lens Mount | C-Mount |
Video Output | 1 Vp-p, 75Ω DC Coupling (0V Clamp) |
Shock | 70G (3 directions, 3 times each) |
Vibration | 10G (20 to 200Hz) |
Optical Filter | No IR cut filter |
Optical Center Accuracy | Position accuracy in H and V direction: /- 0.31mm |
InputVoltage | 12Vdc /- 10% |
Power Consumption | < 2.2 W, 183mA |
Operating Temperature | -5°C ~ 50°C ( 23°F ~ 122°F) |
Storage Temperature | -30°C ~ 65°C ( -21.9°F ~ 149°F) |
Dimensions | 28 (W) x 28 (H) x 46.3 (D) mm (1.1 x 1.1 x 1.8) |
Weight | 52g (1.8 oz.) |
Resources & Documents
stc-a152a-avs.pdf | Spec Sheet |