Sentech : STC-SS1200
Description
The Sentech STC-SS1200 series was designed for high speed applications where size and weight are extremely critical. The remote head design features a light, compact head so that a minimum amount of inertia is generated during very fast stop/start XYZ type movements.
The STC-SS1200 series offers high speed triggering with 60fps analog output, utilizing a VGA progressive scan format.
Specifications
Resolution | VGA (0.3 MegaPixel) |
Image Sensor | 1/3" Interline CCD (ICX424AL) |
Signal Format | Monochrome Progressive Analog |
Frame Rate | 60 fps |
Effective Picture Element | 659 (H) x 494 (V) |
Active Picture Element | 648 (H) x 494 (V) |
Chip Size (mm) | 5.79 (H) x 4.89 (V) |
Cell Size (um) | 7.4 (H) x 7.4 (V) |
Vertical Frequency | 59.94 Hz |
Horizontal Frequency | 31.4685 kHz |
Pixel Clock Frequency | 24.5454 MHz |
Scanning Method | Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4), Binning, Binning Partial Scan (1/1, 1/2, 1/4) |
Sync System | Internal and External (HD/VD) Automatically |
Trigger Mode | Edge Preset: V Reset, Non-Reset, Sync Reset, Restart-Reset; Pulse Width Trigger: V Reset, Non-Reset, Sync Reset, Restart-Reset |
Electronic Shutter | 1/60 ~ 1/20,000 (8 Steps) |
Minimum Illumination | 0.64 Lux @ F1.2, 20 IRE; 1.82 Lux @ F1.2, 50 IRE |
Gain | AGC/Manual (4 to 24 dB) |
S/N Ratio | 52dB (Gain 0dB) |
Gamma | 0.45 /1.0 |
Lens Mount | Special Mount (Male 10.5 Female P0.5) |
Video Output | 1Vp-p, 75Ω |
Shock | 70G (3 directions, 3 times each) |
Vibration | 10G (20 to 200Hz) |
Optical Filter | No IR cut filter |
Optical Center Accuracy | Position accuracy in H and V direction: /- 0.31mm |
InputVoltage | 12V DC |
Power Consumption | 2.64W, ≤ 220 mA |
Operating Temperature | -10°C ~ 45°C ( 14°F ~ 113°F) |
Storage Temperature | -30°C ~ 60°C ( -22°F ~ 140°F) |
Dimensions | CCD Head: 20 (W) x 20 (H) x 25 (D) mm (0.8” x 0.8” x 11.85”); CCU: 110 (W) x 80 (H) x 28 (D) mm (4.4” x 1.12” x 3.2”), Cable: 600 mm (24”) |
Weight | CCD Head: 80g (2.82 oz.); CCU: 150g (5.33 oz.) |