
Pelco : ExSite Enhanced PTZ
ExSite Enhanced High Reliability, Full HD PTZ Explosion-proof IP Camera System
Security Products
Description
ExSite Enhanced Series camera systems are designed to meet demanding explosionproof requirements, providing high reliability, ease of installation, and best-in-class imaging and technology. The ExSite Enhanced Series is designed for rugged environmental applications including oil and LNG facilities, refineries, on and offshore drilling rigs, and on-board marine applications. Featuring rugged 316L stainless steel construction that has been subjected to extensive vibration and environmental testing make it ideal for use in the most extreme conditions of temperature, moisture, ice, and dust. The system can operate from –60° to 60°C (–76° to 140°F) while maintaining compliance to the T6 (<85°C) surface temperature specifications. ExSite Enhanced Series cameras are easy to install and adaptable to most operational needs. The camera has dual-entry ports, allowing for separate transmission and power cables, and it is adaptable to most transmission methods via SFP/FSFP modules. ExSite Enhanced cameras support a range of input power options with a new 48 VDC option that enables installation in DC-only facilities. ExSite Enhanced cameras also come standard with wipers and sun shrouds, capturing desired video regardless of the weather.
ExSite Enhanced cameras are also available in a Fixed Model.
Available PTZ Models
EXP1230-4N PTZ 48 VDC
EXP1230-7N PTZ 100-240 V
EXP1230-7M PTZ with 850 nm near-IR Illuminator;100-240 V
Features
- Up to 1920 x 1080p Resolution Wide Dynamic Range (WDR), 30x zoom lens, and Superb Low light Performance
- Dual Stream H.264 IP Video with Smart Compression
- Rated to Operate from -60 to +60° C while in Compliance to T6 Surface Temperature (<85° C) Hazardous Location Regulations
- 316L Billet Stainless Steel Electro Polished Construction
- Extremely Reliable Pan/Tilt Direct Drive Motion Control System
- Upright or Inverted Installation with Automatic Orientation Detection
- Low Latency Electronics for Improved Pan/Tilt Driveability and Safety
- Standard IP Ethernet Connection and Integrated Transmission Options including Fiber, Ethernet over Coax, and UTP Extension
- Full Suite of Built-In Analytics including AutoTracker, Adaptive Motion Detection, Abandoned Object, and More
- Electronic Image Stabilization
- Onvif Profiles S, G, and Q Conformant
- Dual Cable Entry Ports to Separate Data and Power Cables
- Efficient Installation with a Safety Attach Point, and Simple Wire Termination Methods.
- Vari-zoom IR Illuminator Option with 200 Meter Range
Specifications
CAMERA/OPTICS
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 30X
Digital Zoom 12X
Maximum Resolution 1920 x 1080
Aspect Ratio 16:9
Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)
Horizontal Angle of View 63.7° wide - 2.3° tele
Light Sensitivity*
- Color (33 ms) 0.03 lux
- Color (250 ms) 0.008 lux
- Mono (33 ms) 0.004 lux
- Mono (250 ms) 0.001 lux
Day/Night Capabilities Yes
Shutter Range 1/1 ~ 1/10,000 sec
Signal-to-Noise Ratio >50dB
IR Cut Filter Yes
Wide Dynamic Range 130 db
Iris Control Auto iris with manual override
Backlight Compensation Yes
Automatic Gain Control Yes
Active Noise Filtering Yes; 3D Noise Filtering
Electronic Image Stabilization (EIS) Yes
*Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE (30% of signal level) with Sensitivity Boost OFF; 4X improvement to sensitivity with Sensitivity Boost ON
NETWORK
Interface Ethernet (1000Base-TX or100Base-TX) Auto MDI/MDI-X Auto-negotiate/manual setting FSFP Interface
Ethernet Cabling Type Cat5e or better
SFP/FSFP Interface Supports Pelco FSFP Series Transceivers and third-party MSA Compliant Transceivers
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, and 802.1x (EAP)
Users
- Unicast Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
- Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 2.0, Digital Sentry 7.3 and Pelco VideoXpert 1.9 (or later)
Open API Pelco API or ONVIF Profile S, G, and Q
Mobile Application Integrated to Pelco Mobile App
Video Motion Detection Simple motion detection and camera sabotage
Local Storage SDXC, addressable to 2TB Capture 1–5–10 second video clips on camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol and ONVIF Profile G
VIDEO
Video Encoding H.264 High, Main, or Base profiles and MJPEG
Video Streams Up to 2 simultaneous streams; the second stream is variable based on the configuration of the primary stream
Frame Rate Up to 60, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding, resolution, and stream configuration)
GENERAL
Construction 316L billet electropolished stainless steel with robotic guided laser welding and 100% hydrostatic pressure testing
Window High transmissivity glass
Sun Shroud 316L stainless steel with laser etched logo (electropolished and passivated for environmental protection)
Weight
- EXP1230-4N: 71.7lb (30.3 kg)
- EXP1230-7N: 71.7lb (30.3 kg)
- EXP1230-7M: 89 lb (38.1 kg)
Effective Projected Area (EPA)
- With IR Illuminator 322 in2
- Without IR Illuminator 242 in2
Reset Capabilities Internal reset button for servicability; remote hard-wire reset; remote software restart
MECHANICAL
Cable Entry Dual 1.91 cm (0.75-inch NPT) threaded openings
Pan Movement 360 continuous pan rotation
Vertical Tilt +90° to -90° from Horizontal (with automatic re-alignment when installed inverted)
Pan/Tilt Speed 0.05°/sec to 200°/sec with proportional motion
Preset Accuracy ±0.03°
Wind Speeds
- Full Motion Control 0-64 knots (74mph/119kmh)
- Limited Speed Control 65-96 knots (110mph/177kmh)
- Hold Position 97-112 knots (129mph/208kmh)
- Survives 113-130 knots (150mph/241kmh)
OPERATING TEMPERATURE
Operating Humidity 10% to 100% RH (condensing)
Storage Humidity 10% to 100% RH (non-condensing)
Temperature Power 48 VDC/100-240 V
Sustaining Maximum 60°C (140°F) 60°C (140°F) Minimum –60°C (-76°F) –60°C (-76°F)
Ice Free Windows –40°C (-40°F) –40°C (-40°F)
Cold Start† –40°C (-40°F) –40°C (-40°F)
Storage –60°C to 60°C (–76°F to 140°F) –60°C to 60°C (–76°F to 140°F)
ELECTRICAL
Alarm
- Unsupervised Detects open or closed alarm state
- Supervised Detects open and short alarm state with external 1-kohm resistor to detect alarm tampering
- Input 3.5 VDC maximum, 3.5 mA maximum
Relay Output 30 VDC, 500 mA maximum
Input Power Options 48 VDC, 2A and 100-240 VAC, 2A @ 50/60 Hz
Input Voltage Range ±10%