
Pelco : Sarix IXE Series
Sarix Enhanced IXE+ Next Generation Box IP Cameras with SureVision 3.0 Up to 3MP, H.264, with WDR and low-light performance
Security Products
Description
The IXE Series Box Cameras are compatible with a choice of standard CS mount megapixel lenses for wide angle or long range surveillance needs. The box cameras feature an auto back focus mechanism to accommodate this range of lenses and to ensure that the camera automatically stays in perfect focus. The Sarix IXE Series features advanced color science and a mechanical IR cut filter for increased sensitivity in low-light installations.
Sarix® Enhanced (E) range cameras feature SureVision technology, delivering high definition (HD) resolution, consistent color science, fast processing power, and simultaneous advanced low-light performance with wide dynamic range (WDR) and antibloom technologies. New advancements include 3D noise filtering, smooth response to illumination changes, and improved tone mapping to retain color accuracy and overall image contrast. Designed to install quickly, the cameras include auto back focus (ABF), built-in analytics, and other advanced features needed for demanding security applications.
Available Models
IXE22 Sarix Enhanced Box with 2 MegaPixel Resolution
IXE32 Sarix Enhanced Box with 3 MegaPixel Resolution
Recommended Lenses for use with Sarix Enhanced Box Cameras
Features
- SureVision 3.0 Technology, Including:
- 130 dB Wide Dynamic Range (WDR)
- Advanced Low-Light Performance, 0.05 lux
- Anti-Bloom Technology
- 3D Noise Filtering, Enhanced Tone Mapping
- Up to 3 Megapixel (MPx) Resolution
- Up to 60 Frames per Second (fps)
- CS Lens Mounts with Auto Back Focus (ABF)
- Power over Ethernet (PoE), IEEE 802.3af, 24 VAC, 12 VDC
- Pelco H.264 Smart Compression Technology
- Built-in Analytics Suite
- Up to 128 GB Edge Storage with SD Card
Specifications
CAMERA
Imaging Device 1/2.8-inch
Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution
- 3 MPx 2048 x 1536
- 2 MPx 1920 x 1080
- 1 MPx 1280 x 960
Signal-to-Noise Ratio >60 dB
Auto Back Focus Yes
Electronic Shutter Range 1/20000 sec to 2 sec
True Wide Dynamic Range 130 dB
White Balance Range 2,000° to 10,000°K
Day/Night Capabilities Yes
Mechanical IR Cut Filter Yes, (ON/OFF/AUTO selectable), with different set points on lux Micro SD Card Support Up to 128 GB
SDHC/SDXC Cards Supported Yes
Sensitivity f/1.3; 2,850°K; SNR >20 dB
- Color (33 ms) 0.050 lux
- Color (500 ms) 0.005 lux
- Mono (33 ms) 0.010 lux
- Mono (500 ms) 0.001 lux
NETWORK
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP), NTCIP 1205
Users Unicast Up to 20 simultaneous users depending on the resolution settings Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
MECHANICAL
Lens Mount CS mount
Auto Iris Type DC auto iris
Camera Mount 1/4 in. UNC-20 screw; top and bottom of camera housing
Field of View Recommended Lenses
Focal Length | Aspect | 3 MPx | 3 MPx | 1.3&2 MPx | 1.3&2 MPx |
---|---|---|---|---|---|
Horiz | Vert | Horiz | Vert | ||
2.2~6mm | Wide | 132° | 100° | 124° | 70° |
2.2~6mm | Tele | 50° | 37° | 47° | 26° |
2.8~8mm | Wide | 112° | 81° | 105° | 57° |
2.8~8mm | Tele | 38° | 29° | 36° | 20° |
15~50mm | Wide | 20° | 15° | 19° | 11° |
15~50mm | Tele | 6° | 4° | 6° | 3° |
AUDIO
Streaming Bidirectional: full or half duplex
Input/Output Line level/external microphone input and built-in microphone; Single-ended, 1 Vp-p max. signal level
Compression G.711and PCM 8 bit, 8 kHz mono at 64 kbit/s
PHYSICAL
Construction
Material Aluminum back and plastic front
Finish RAL 9005, matte black
Weight Unit 0.52 kg (1.16 lb) Shipping 0.64 kg (1.41 lb)
Product Box Dimensions (approximate) 12.7 x 19.69 x 12.7 cm (5.0" D x 7.75" W x 5.0" H)
ENVIRONMENTAL
Operating Temperature –10° to 55°C (14° to 131°F)
Storage Temperature –40° to 60°C (–40° to 140°F)
Operating Humidity 5 to 95%, RH noncondensing
Storage Humidity 20 to 80%, RH noncondensing
ELECTRICAL
Network Port RJ-45 connector for 100Base-TX Auto MDI/MDI-X
Cable Type Cat5 or better for 100Base-TX
Input Power PoE (IEEE 802.3af, Class 3), 24 VAC ±10%, 12 VDC ±10%
Power Consumption Up to 12W nominal
Current Consumption 330 mA @ POE; 0.5 A @ 24 VAC; 1A @ 12 VDC
Local Storage Micro SD, SDHC, SDXC
Alarm Unsupervised Detects open or closed alarm state
Input 5 VDC maximum, 0.5 mA maximum
Relay Output ±350V VDC maximum, ±130 mA maximum
VIDEO
Video Streams Independently configurable primary and secondary streams plus service stream
Maximum Frame Rate Up to 60 frames per second, 30 fps with WDR
Video Encoding H.264 High, Main, or Base profiles; and MJPEG
Bit Rate Control Constrained variable bit rate (CVBR) and constant bit rate (CBR)
Corridor Mode Electronic image flip and mirror: 180°, 90° and 270° (H.264 only)
Service Stream JPEG stream; 640 x 480 or 640 x 360, up to 15 fps
SOFTWARE FEATURES
- Multilingual menus in user interface: English, French, Italian, German, Spanish, Portuguese, Russian, Chinese, Turkish
- 16 window blanks, configurable in size
- Password protection
- Snapshot with JPEG capture at the same resolution as the highest stream configured
- Text overlays for camera name, time, date
- Image Overlays
MINIMUM SYSTEM REQUIREMENTS
Processor Intel® Core™ i3 processor, 2.4 GHz
Operating System Microsoft® Windows® 7 (32- and 64-bit),, or DirectX®11, Windows XP Service Pack 3 with DirectX 9.0c or Mac® OS X 10.4 (or later)
Memory 4 GB RAM
Network Interface 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser Internet Explorer® 8.0 (or later), Google Chrome™ (51 or later) or Mozilla® Firefox® 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player Pelco Media Player for Windows 7, XP, or Vista; or QuickTime 7.6.4 for Mac OS X 10.4 (or later)
ANALYTICS
Required Systems for Analytics
Pelco Interface WS5200 Advanced System Management Software on an Endura (2.0 or later) system
Open API The Pelco API can transmit behavior alarm data to third-party applications
INTEGRATION
Pelco System Integration VideoXpert; Endura 2.0 (or later); Digital Sentry 7.3 (or later)
Open API Pelco API or ONVIF Profile S, G, and Q
Mobile Application Integrated with Pelco Mobile Application
CERTIFICATIONS/RATINGS
- CE (Class A)
- FCC (Class A)
- ICES-003 (Class A)
- UL/cUL Listed
- UL/IEC 60950-22
- KC
- RCM
- RoHS
- ONVIF Profile S, Profile G, and Profile Q Conformant
Resources & Documents
pelco-sarix-enhanced-ixe-series-box-specs.pdf |