ENC5516 H.264 Direct-Attached Video Encoder with 16 Analog Channels, D1 at 30/25 IPS

Digital Sentry® ENC5516 video encoder is purpose-built to provide direct-attached support for analog cameras on the high-performance Digital Sentry network video recorder (NVR) platform, and provides unique and affordable support for IP migration. The ENC5516 is a convenient replacement for existing DVRs and lets customers leverage their existing analog wiring infrastructure.

Existing analog infrastructure means existing analog wiring structures must be supported. Use the ENC5516 for capturing the BNC connections from other recording systems. Directly attach up to four ENC5516s through supplied cables to one DSSRV to accommodate up to 64 analog cameras. Add the ENC5516 to your DSSRV for an integrated, high-performance IP migration platform.

Note: requires ENC5400-4PORT Capture card (sold separately)

Includes

Power Adapter 12 V through auto-ranging DC (12 V, 6 A); allows for redundant power

Power Cord Based on country designation Note: Units shipped to China do not include power cords

Terminal Block 3, 5-pin terminal blocks 4, 10-pin terminal blocks

Rack Mount 2, mounting brackets

Rubber Feet 4 (for desktop)

Direct-Attached Video Support for Digital Sentry® Network Video Recorder

Supports 16 Channels per Encoder

Provides 16 Looping, Auto-Terminating Video Outputs

H.264 Hardware Compression

Up to 30/25 (NTSC/PAL) ips at CIF, 2CIF, and D1 per Input

Frame Rates and Resolutions Configurable per Channel

16 Audio Inputs, 16 Alarm Inputs, and 4 Relay Outputs

VIDEO/AUDIO

Video Standards NTSC/PAL

Video Encoding H.264, Main profile

Video Resolutions

Analog Cameras NTSC PAL

D1 720 x 480 720 x 576

2CIF 720 x 240 720 x 288

CIF 352 x 240 352 x 288

Video Output 2 BNC connectors (1 for MUX and 1 for spot monitor); 16 BNC looping video output

Audio Input 16 channels

Audio Format Pulse code modulation (PCM)

Sampling Resolution 8- or 16-bit

Sampling Frequency 4, 8, 16, or 32 kHz

PTZ CONTROL

Interface 2; RS-422, RS-485, video in

Protocol Pelco P, Pelco C, and Pelco D

ALARMS/RELAYS

Alarms In 16

Relays Out 4

POWER

Power Consumption

Input Voltage 12 VDC (through supplied auto-ranging 90 to 240 VAC power adapter)

Current 2130 mA

Power 25.56 W (maximum ±5%)

FRONT PANEL INDICATORS

PWR1 Green when the power source is connected

PWR2 Green when the power source is connected

LINK Green when the host is turned on and a connection is made between the encoder and the host

INFO Blinks green when the firmware is updating

Video Input (1 to 16 Channels) Green when detecting an active video signal on the corresponding video input connector

ENVIRONMENTAL

Operating Temperature 0° to 60°C (32° to 140°F)

Operating Humidity 85% maximum relative humidity, noncondensing

PHYSICAL

Dimensions 18.9 x 44.2 x 4.4 cm (7.5" D x 17.4" W x 1.7" H)

Unit Weight 2.7 kg (6 lb)

Shipping Weight 5.4 kg (12 lb)

CERTIFICATIONS/RATINGS

CE, Class A; meets EN50130-4 standard requirements

FCC, Class A

UL/cUL Listed

CCC*

KCC*

TUV