BFS-PGE-16S2M-CS Blackfly S Mono 1.6 MP GigE Vision (Sony IMX273)
CCD and CMOS Cameras
Point Grey : BFS-PGE-16S2M-CS
Description
The FLIR Blackfly S Mono BFS-PGE-16S2M-CS combines the newest CMOS image sensors with our new and intuitive Spinnaker software development kit. The many new advanced camera features are designed to meet your complex imaging needs and speed up development time.
The BFE-PGE-16S2M-CS model leverages the Sony Pregius IMX273 sensor. This sensor is an excellent replacement option for the ICX445 with its 1440 x 1080 resolution, 1/2.9″ sensor size and 3.45 μm pixel size. It also makes improvements upon the ICX445 with much higher FPS, higher saturation capacity, and lower read noise.
For a color alternative, please see BFE-PGE-16S2C-CS
Features
Leverage the latest CMOS sensors and new on-camera image processing features with BFS-PGE-16S2M-CS. Harness increased binning flexibility, powerful auto-exposure controls and robust color transformation tools.
Improve cycle time using advanced camera controls and programmable logic Utilize sequencer, chunk data, event notification, counters, timers and logic blocks.
Accelerate your time to market using our GenICam3 API, GUI API library, detailed API logging and comprehensive documentation.
IEEE 1588 Precision Time Protocol for accurate clock synchronization with no user oversight.
Specifications
BFS-PGE-16S2M-CS
Resolution 1440 x 1080
Frame Rate* 78 FPS
Megapixels 1.6 MP
Chroma Mono
Sensor Sony IMX273, CMOS, 1/2.9″
Readout Method Global shutter
Pixel Size 3.45 μm
Lens Mount CS-mount
ADC 10-bit, 12-bit
Minimum Frame Rate** 1 FPS
Gain Range** 0 to 47 dB
Exposure Range** 7 us to 30 s
Acquisition Modes Continuous, Single Frame, Multi Frame
Partial Image Modes Pixel binning, decimation, ROI
Image Processing Gamma, lookup table, and sharpness
Sequencer Up to 8 sets using 2 features
Image Buffer 240 MB
User Sets 2 user configuration sets for custom camera settings
Flash Memory 6 MB non-volatile memory
Opto-isolated I/O 1 input, 1 output
Non-isolated I/O 1 bi-directional, 1 input
Serial Port 1 (over non-isolated I/O)
Auxiliary Output 3.3 V, 120 mA maximum
Interface GigE
Power Requirements Power over Ethernet (PoE); or 12 V nominal (8 – 24 V)
Power Consumption 3 W maximum(2.8 W nominal)
Dimensions/Mass 29 mmx 29 mmx 30 mm/ 36 g
Machine Vision Standard GigE Vision v1.2
Compliance CE, FCC, KCC, RoHS, REACH. The ECCN for this product is: EAR099.
Temperature Operating: 0°C to 50°C Storage: -30°C to 60°C
Humidity Operating: 20% to 80% (no condensation) Storage: 30% to 95% (no condensation)
Warranty 3 years
*Frame rates are measured with Device Link Throughput Limit of 125 MBps and Acquisition Frame Rate disabled. Values are rounded down to whole numbers.
**Values are the same in binning and no binning modes.