Basler a2A1920-160umPRO Ace2 Pro USB3.0 CMOS Monochrome Camera, 160 fps, 2.3 Megapixel
Industrial Machine Vision And Network IP Cameras

Basler : a2A1920-160umPRO
Description
The Basler a2A1920-160umPRO USB 3.0 monochrome camera with the Sony IMX392 CMOS sensor delivers 160 frames per second at 2.3 MP Resolution.
The a2A1920-160umPRO has all the proven Basler reliability with extensive computer vision feature set for standard machine vision applications, plus new, unique Beyond features from Basler for maximum performance, including Compression Beyond and Pixel Beyond. The a2A1920-160umPRO is a monochrome USB3.0, Pro ace2 camera.
Compression Beyond compresses image data directly in the camera’s FPGA, in real time and without sacrificing image quality. As a result, more bandwidth is available, which in turn ensures considerably higher frame rates, especially with GigE – up to two to three times the rate, depending on the image content.
Pixel Beyond uses an interpolation method developed by Basler to change the pixel size. Similar to conventional binning functions, this allows the adjustment of various sensor characteristics.
Also Available:
a2A1920-160ucPRO | Pro Color USB3.0 2.3MP Camera |
a2a1920-160umBAS | Basic Monochrome USB 3.0 2.3MP Camera |
a2A1920-51gmPRO | Pro Monochrome GigE 2.3MP Camera (51fps) |
Features
Beyond Features | Compression Beyond Pixel Beyond |
Chunks | CRC Checksum Counter Value Exposure Time Frame Counter Gain Line Status All Timestamp Trigger Input Counter |
Color Creation and enhancement | Auto Function Profile: Anti-Flicker Backlight Compensation |
Event Reporting | Critical Temperature Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait Over Temperature |
I/O Control and Line Source Signals | Acquistion Trigger Wait/ Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Input Filter Minimum Output Pulse Width Timer Active User Output |
Image Acquisition Control | Acquisition Abort Acquisition Single Frame Acquisition Start Acquisition Status Acquisition Stop Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software |
Miscellaneous | Device Information Parameters Device Temperature User Defined Values User Sets (Configuration Sets) |
PGI | Denoising Improved Sharpness |
Pixel Formats | Mono 10 Mono 10p (Mono 10 Packed) Mono 12 Mono 12p (Mono 12 Packed) Mono 8 |
Standard Features | 12Bit Lookup Table (LUT) Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed Exposure Mode: Trigger Width (Control via External Trigger) Exposure Time Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Stacked ROI (coming soon) Test Images Ultra Short Exposure Time Mode |
Specifications
Sensor | ||
---|---|---|
Sensor Vendor | Sony | |
Sensor | IMX392 | |
Shutter | Global Shutter | |
Max. Image Circle | 1/2.3″ | |
Sensor Type | CMOS | |
Sensor Size | 6.6 mm x 4.1 mm | |
Resolution (HxV) | 1920 px x 1200 px | |
Resolution | 2.3 MP | |
Pixel Size (H x V) | 3.45 µm x 3.45 µm | |
Frame Rate | 160 fps | |
Frame Rate Compression Beyond | up to 170 fps | |
Mono/Color | Mono |
EMVA Data | ||
---|---|---|
EMVA Quantum Efficiency (typical) | 63.8 % | |
Dark Noise (typical) | 4.5 e¯ | |
Saturation Capacity (typical) | 10.4 ke¯ | |
Dynamic Range (typical) | 71.5 dB | |
Signal-to-Noise Ratio (typical) | 40.1 dB |
Camera Data | ||
---|---|---|
Interface | USB 3.0 | |
Pixel Bit Depth | 8/10/12 bits | |
Synchronization |
|
|
Exposure Control |
|
|
Digital Input | 1 | |
General Purpose I/O | 2 | |
Power Requirements |
|
|
Power Consumption (typical) | 3 W |
Housing | ||
---|---|---|
Housing Type | Box | |
Housing Size (L x W x H) | 42.8 mm x 29 mm x 29 mm | |
Lens Mount |
|
|
Housing Temperature | 0 – 50°C | |
Weight (typical) | 90g |
Conformity | ||
---|---|---|
Conformity |
|