Control Engine |
Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; transaction-safe extended FAT file system; battery-backed non-volatile real-time clock; supports up to 10 simultaneously running programs (license required [1]); preloaded .AV Framework base program |
Communications |
Ethernet |
10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, SMTP e-mail client, HTTPS web server, HTTPS web browser setup and XiO Cloud client, IEEE 802.3af & 802.3at Type 1 PoE compliant |
Connectors |
LAN PoE |
(1) 8-pin RJ45 connector, female;
10Base-T/100Base-TX Ethernet port;
PoE PD port |
Ground |
(1) 6-32 screw;
Chassis ground lug (flying lead with ring terminal included) |
Controls & Indicators |
Assignable Buttons |
(6) Projected capacitive pushbuttons, each may be labeled using one of 25 pre-labeled icon chips or hidden using one of five blackout chips (included), custom laser-etched icon chips are available using optional MPB3/MPC3-BTN3-B ENGRAVED engravable icon chips (sold separately) |
Mute |
(1) Projected capacitive pushbutton with "mute" icon |
-/+ |
(2) Projected capacitive pushbuttons labeled with "-" and "+" icons for volume control |
Volume Gauge |
(1) Blue LED multi-segment bargraph for volume level indication |
Power |
(1) Projected capacitive pushbutton labeled with “power” icon |
HW-R |
(1) Pushbutton (behind front panel) for hardware reset (reboots the processor) |
SW-R |
(1) Pushbutton (behind front panel) for software reset (restarts the software program) |
LAN PoE |
(2) LEDs (on rear panel LAN port), green LED indicates Ethernet link status, amber LED indicates Ethernet activity |
Illumination |
Each capacitive button is individually backlit white when inactive and blue when active; auto-brightness control adjusts all backlighting in three levels according to the ambient light level; backlighting may be dimmed or extinguished when unit enters idle state |
Note: All capacitive buttons are custom programmable |
Light Sensor |
Photosensor detects the ambient light level to enable auto-brightness control |
Proximity Sensor |
Type |
Eye-safe 940 nm laser ranging sensor |
Range |
Adjustable from 20 to 90 cm (8 to 35 inches) |
Detects bodies within range and wakes the unit from standby or idle state |
Audio |
Key Click |
Sounds when any button is pressed, adjustable to one of three volume settings or off |
Power |
Power over Ethernet |
IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 Watts) PoE Powered Device |
Power Consumption |
3 Watts typical |
Environmental |
Temperature |
5° to 40° C (41° to 104° F) |
Humidity |
10% to 90% RH (non-condensing) |
Heat Dissipation |
11 BTU/hr |
Construction |
Housing |
Plastic with metal mounting plate, removable front panel with optional security screw |
Flush Wall Mount |
Mounts in a 1-Gang European (DIN 49073) electrical box (not included), mounts in a 2-gang US electrical box using MPC3-101/102/201-RMB Retrofit Mounting Bracket (sold separately) |
Lectern Mount |
Mounts in a 52 mm (2-1/16 inch) square cutout using bracket provided |
Tabletop Mount |
Sits on a tabletop using MPC3/MPB3-TTK-SQR-B tabletop kit (sold separately) |
Dimensions |
Height |
87 mm (3.42 in) |
Width |
87 mm (3.42 in) |
Depth |
48 mm (1.88 in) |
Weight |
208 g (7.35 oz) |
Compliance |
CE, IC, FCC Part 15 Class B digital device; Class 1M laser product, complies with safety regulations of IEC- 60825-1, FDA 21 CFR 1040.11, and FDA 21 CRF 1040.10 |