(discontinued) DM Lite 4K Multiformat 4×1 AV Switch and Receiver with Ethernet Switch Option

Description

This item is DISCONTINUED.

The Crestron® HD-RX-4K-410-C-E or HD‑RX-4K-410-C-E-SW4 multiformat AV switch and receiver provides enhanced HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. Compatible with all DM Lite™ transmitters, the HD‑RX-4K-410-C-E(-SW4) provides two DM Lite inputs for connection to up to two transmitters. A CATx (CAT5e or higher) twisted pair cable connects a transmitter to the HD‑RX-4K-410-C-E(-SW4) for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230 feet (70 meters). For higher resolutions up to 4K, the maximum transmission distance is 130 feet (40 meters).1

NOTE: Power is transmitted over the CATx cable that connects the HD‑RX-4K-410-C-E to a DM Lite transmitter. The HD‑RX-4K-410-C-E can power two transmitters simultaneously.

In addition to two DM Lite inputs, the HD‑RX-4K-410-C-E provides two HDMI inputs that can be connected to local AV sources.

Automatic Switching of Inputs
Automatic switching among the DM Lite and HDMI inputs can occur based on the last connected input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. Input selection push buttons on the front panel of the HD‑RX-4K-410-C-E also allow the desired input to be selected manually.

HDMI Output with 4K Scaler
A single HDMI output with a built-in scaler connects to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

4-Port Gigabit Ethernet Switch with Two PoE+ Ports 
HD-RX-4K-410-C-E-SW4 ONLY

The HD‑RX-4K-410-C-E-SW4 includes a 4-port Gigabit Ethernet switch. Two of the ports (Ports 3 and 4) are PoE+ power sourcing equipment (PSE) ports that can be connected to two PoE+ powered devices (PDs) simultaneously.

Enhanced Audio Capabilities
The HD‑RX-4K-410-C-E includes a built-in amplifier that can drive a pair of 4- or 8-ohm stereo speakers (25 watts per channel). The HD‑RX-4K-410-C-E also provides 6×2 audio mixing capability. Embedded HDMI 2-channel LPCM audio can be extracted from the selected DM Lite or HDMI input and combined with the five analog audio inputs (LINE 1, LINE 2, MIC 1, MIC 2, and AUX). Gain and mute sound adjustments can be made to each of the six inputs being mixed. The mixed audio is then transmitted as two audio outputs: one mirrored AUX 1, SPEAKER, HDMI mixer output and one AUX 2 output. Audio mixer settings such as volume and mute control are configurable for each of the two outputs independently.

Device Control
Equipped with onboard control ports, the HD‑RX-4K-410-C-E can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact-closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors.