Call Now: 1-800-284-2288 |
USB over Ethernet Network Endpoint Wall Plate with Routing, Avilable for Local or Remote use, and in Black or white |
|
|
The Crestron USB-NX2 USB over Ethernet Network Endpoint Wall Plates with Routing (USB-NX2-LOCAL-1G and USB‑NX2‑REMOTE‑1G) connect USB peripheral devices at multiple locations throughout a home, business, or campus and route them to one local device (such as a PC) up to 100 m (330 ft). The USB signals are transported over the local network and managed through a Crestron control system.
As part of a Crestron DigitalMedia™ system, the USB endpoints provide seamless routing of USB signals alongside video and audio. From any room with a video display, you can switch between several computers, media servers, and game consoles anywhere in the building and control each one using your mouse and keyboard, game controller, or electronic whiteboard.
The USB endpoints expand on DigitalMedia’s built-in USB HID routing abilities, adding enhanced USB connectivity to DM® transmitters, receivers, or switchers without requiring any additional wiring. Simply connect a USB endpoint to the LAN port of a DM transmitter or receiver, or to a port on the local area network.3 Two types of wall plate USB endpoints are available:
USB‑NX2‑REMOTE‑1G - Provides connectivity for up to 4 USB devices (keyboards, whiteboards, mobile devices, etc.) at one location
USB‑NX2‑LOCAL‑1G - Provides connectivity for a single USB host (computer, media server, codec, etc.)
The USB endpoints provide compatibility with most USB 1.1 or 2.0 devices, including smartphones, tablets, media players, cameras, printers, flash drives, hard drives, hubs, and more.1 Sync your smartphone, upload photos, and share music and video files with a computer — all from clear across the building.
The USB endpoints may be used to provide simple, point-to-point USB signal extension, either over an Ethernet LAN or a dedicated CAT5e wire.2 At least one remote (device) endpoint (USB‑NX2‑REMOTE‑1G) and one local (host) endpoint (USB‑NX2‑LOCAL‑1G ) are required to form a working system. The endpoints are sold individually to accommodate any system configuration.
The USB‑NX2‑LOCAL‑1G and USB‑NX2‑REMOTE‑1G mount in a North American, unobstructed 1-gang electrical box and are compatible with the USB‑EXT‑DM‑LOCAL and USB‑EXT‑DM‑REMOTE endpoints.
Model | Description |
USB-NX2-LOCAL-1G-W | USB over Ethernet Network Endpoint Wall Plate with Routing, Local, White |
USB-NX2-LOCAL-1G-B | USB over Ethernet Network Endpoint Wall Plate with Routing, Local, Black |
USB-NX2-REMOTE-1G-W | USB over Ethernet Network Endpoint Wall, Plate with Routing, Remote, White |
USB-NX2-REMOTE-1G-B | USB over Ethernet Network Endpoint Wall, Plate with Routing, Remote, Black |
Communications | |
Ethernet | 100Base-T or 1000Base-T, Layer 2 |
Link Speed | Up to 480 Mbps, dependent upon network speed and quality |
USB Device Support | USB 1.1 and 2.0 compatible including isochronous devices1 |
Connectors – Local endpoint | |
Link | (1) 8-pin RJ45 connector, female; Connects to an Ethernet network or directly to a Remote endpoint2 IEEE 802.3Af |
Programming | (1) five-pin port not intended for use |
USB | (1) USB Type B connector, female (USB B to A cable included) USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc. |
Connectors – Remote endpoint | |
24 V 0.75A | (1) 2-pin 3.5 mm detachable terminal block; 24 VDC power input; PW-2407WUL power supply included |
Config | For factory use only |
Link | (1) 8-pin RJ45 connector, female; Connects to Link port on the Local endpoint2 IEEE 802.3Af |
Programming | (1) five-pin port not intended for use |
USB | (4) USB Type A connectors, female; USB 2.0 host ports for connection of USB devices such as mice, keyboards, and other USB devices1 |
Indicators – Local endpoint | |
Activity | (1) Amber LED, indicates data activity over the Link connection |
Host | (1) Green LED, indicates a valid connection to the USB host |
Link | (1) Green LED, indicates a valid Link connection to the Remote endpoint |
Pair | (1) Pushbutton, used to establish a connection with a Remote endpoint |
Power | (1) Blue LED, indicates operating power is supplied via the USB host |
Indicators – Remote endpoint | |
Activity | (1) Amber LED, indicates data activity over the Link connection |
Host | (1) Green LED, indicates a valid connection to the USB host at the Local endpoint |
Link | (1) Green LED, indicates a valid Link connection to the Local endpoint |
Pair | (1) Pushbutton, used to establish a connection with a Local endpoint |
Power | (1) Blue LED, indicates operating power is supplied via the power supply |
Power | |
USB-PLUS-LOCAL-1G | USB powered via the USB host interface IEEE 802.3Af Powered device |
USB-PLUS-REMOTE-1G | Input: 100-240 VAC, 50/60 Hz; Output: 0.75 A @ 24 VDC, model PW-2407WUL included IEEE 802.3Af Powered device |
Environmental | |
Temperature | 32° to 122° F (0° to 50° C) |
Humidity | 20% to 80% RH (non-condensing) |
Enclosure | |
Construction | Metal, black finish with white or black polycarbonate label overlay |
Flush Wall Mount | Mounts in a North American unobstructed 1-gang electrical box (not included); Minimum mounting depth of 2 in. (51 mm) required; (1) white or black FP-G1 series decorator style faceplate (included) |
Dimensions | |
Height | 4.12 in. (104 mm) |
Width | 1.72 in. (22 mm) |
Depth | 1.95 in. (50 mm) |
Compliance | |
IC, FCC Part 15 Class B digital device |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|