
Weldex : WDP-84ML2M-REV01
Description
The Weldex WDP-84ML2M-REV01 series cameras are 2 megapixel network mullion cameras.
WDP-84ML2M-REV01-BK (PANTONE Black C)
WDP-84ML2M-REV01-BR (PANTONE 875C)
WDP-84ML2M-REV01-SL (PANTONE 877C)
WDP-84ML2M-REV01-WT (PANTONE White)
Features
- Sony CMOS Full-HD sensor
- Up to 30fps@1080p (H.264)
- Progressive scan
- Dual streaming (H.264 & MJPEG)
- Power over Ethernet (PoE)
- ONVIF profile S supported
Specifications
Camera | |
Image pick-up device | 1/2.9inch 2.38megapixel full HD CMOS image sensor |
Scanning System | Progressive Scan |
Lens | 2.9mm 3megapixel fixed lens |
Electronic Shutter Speed | Auto / Flicker / NTSC : 1/30 ~ 1/50,000sec / PAL : 1/25 ~ 1/50,000sec |
Day and Night | Auto / BW / Color (selectable) |
White Balance | AWB / Manual / Indoor / Outdoor |
Backlight Compensation | OFF / WDR / BLC / HSBLC |
AGC | Low / Middle / High |
Adjustments | White balance / Exposure control / Color, Brightness / Sharpness |
Noise Reduction | 2DNR/ 3DNR/ Smart NR |
S/N Ratio | More than 50dB |
Min. Illumination | 1.0 Lux(color), 0.5Lux(BW) |
Video | |
Compression | H.264, MJPEG |
Streaming | Simultaneous dual streams |
H.264 streaming over UDP, TCP, HTTP, or HTTPS | |
MJPEG streaming over HTTP or HTTPS | |
Resolution | 640x480, 800x480, 800x600, 1024x768, 1280x720, 1280x1024, 1920x1080 |
Frame Rate | Up to 30 fps@2048x1536 |
Networking | |
Interface | 10/100 Mbps Ethernet, RJ-45 |
ONVIF | Version 2.2 support |
Protocols | IPv4, TCP/IP, HTTP, HTTPS, UPnP, BONJOUR RTP/RTSP, SMTP, FTP, DHCP, NTP, DNS, DDNS, SNMP |
User | 8 Clients monitoring at the same time |
Security | |
Security | Multi-level user access with password protection |
IP address filtering | |
HTTPS encrypted data transmission | |
Maintenance | |
Firmware | Supports firmware upgrade |
Dual Booting | Support for firmware recovery |
Factory reset | Restores to factory default settings |
Application | |
Application | SDK available for application development and system integration |
LED Indicators | |
System Status | Normal operation, firmware upgrade, network unlinked |
no connection of camera unit, system startup | |
Factory Reset | Factory Resetting |
Power Status | Power On/Off |
Connectors | |
Ethernet | RJ-45 jack |
Power Input | DC Jack |
Camera Input | USB STP cable, max length = 23feets, impedance 100ohm |
Power | |
Power over Ethernet (PoE) | IEEE 802.3af |
Power Supply | DC 9~28V |
Power Consumption | Max 6.5W |
Environmental | |
Operating Temperature | -30°C ~ +60°C |
Humidity | 10 ~ 90% RH, non-condensing |
Dimensions | Camera unit : 44.2(W) x 44.2(H) x 38.5(D) |
Main unit : 122.7(W) x 39.8(H) x 53.2(D) | |
Extension cable length : 7000.0 ± 100 |