
Opto Engineering : LTBP240108-W-CO
High power strobed LED backlight, 240×108 illumination area, white, > 4500 K, with collimation film in both directions
By: Opto Engineering
Optical Imaging Technologies for Machine Vision
Description
Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request. Models where two currents are listed (such as LTBP240180-R) feature two separate channels. At 25°C.
Specifications
Lighting specifications | |||||||||||
Modules | 5x3 | ||||||||||
Illumination area width | (mm) | 240 | |||||||||
Illumination area height | (mm) | 108 | |||||||||
Number of LEDs | 720 | ||||||||||
Light color, peak wavelength | white, > 4500 K | ||||||||||
Spectral FWHM | (nm) | - | |||||||||
Illuminance (1) | (klux) | n.a. | |||||||||
Diffuser | yes | ||||||||||
Collimation film | yes |
Electrical specifications | |||||||||||
Power supply mode | Strobe only, constant current driving | ||||||||||
Peak power consumption | (W) | 184.3 | |||||||||
Max pulse current (2) | (A) | 7.2 | |||||||||
Typical pulse voltage | (V) | 25.6 | |||||||||
Max pulse duration | (ms) | 1 | |||||||||
Max duty-cycle | (%) | 1.5 | |||||||||
Max continuous current | (mA) | 75 | |||||||||
Estimated MTBF (3) | (hours) | > 50000 | |||||||||
Connector | M8 | ||||||||||
Cables | CBLT003 included |
Mechanical specifications | |||||||||||
Length | (mm) | 252 | |||||||||
Width | (mm) | 128 | |||||||||
Height | (mm) | 26 | |||||||||
Mass | (g) | 1111 | |||||||||
Clamping system | 8x M6 threaded holes |
Environmental specifications | |||||||||||
Operating temperature | (°C) | 0-40 | |||||||||
Storage temperature | (°C) | 0-50 | |||||||||
Operating relative humidity | (%) | 20-85, non condensing | |||||||||
IP rating | IP40 | ||||||||||
Installation | Indoor use only |
Eye safety | |||||||||||
Risk group according to CEI EN 62471:2010 | Exempt |