Optical Imaging Technologies for Machine Vision
By: Opto Engineering
Optical Imaging Technologies for Machine Vision
Opto Engineering : LTLNC050-IR850
Specifications
| Lighting specifications | |||||||||||
| Illumination area width | (mm) | 50 | |||||||||
| Illumination area height | (mm) | 15 | |||||||||
| Optimal working distance | (mm) | 20-100 | |||||||||
| Number of LEDs | 11 | ||||||||||
| Light color, peak wavelength | IR, 850 nm | ||||||||||
| Spectral FWHM | (nm) | 30 | |||||||||
| Illuminance (1) | (klux) | – | |||||||||
| Irradiance (1) | (W/m2) | n.a. | |||||||||
| Electrical specifications | |||||||||||
| Supply voltage (2) | 24 | ||||||||||
| Current (3) | (mA) | 300 | |||||||||
| Power consumption | (W) | 7.2 | |||||||||
| Typical pulse voltage | (V) | 59 | |||||||||
| Max pulse current | (mA) | 1500 | |||||||||
| Peak power consumption | (W) | 89 | |||||||||
| Max pulse duration | (ms) | 100 | |||||||||
| Max duty-cycle | (%) | 5 | |||||||||
| Estimated MTBF (4) | (hours) | > 20000 | |||||||||
| Connector | M8 | ||||||||||
| Cables | CBLT003 included | ||||||||||
| Mechanical specifications | |||||||||||
| Length | (mm) | 80 | |||||||||
| Width | (mm) | 32 | |||||||||
| Height | (mm) | 60 | |||||||||
| Mass | (g) | 300 | |||||||||
| Clamping system | 4x M3 threaded holes | ||||||||||
| Cooling method | air compressed cooling or passive | ||||||||||
| Environmental specifications | |||||||||||
| Operating temperature | (°C) | 0-40 | |||||||||
| Storage temperature | (°C) | 0-50 | |||||||||
| Operating relative humidity | (%) | 20-85, non condensing | |||||||||
| Installation | Indoor use only | ||||||||||
| Eye safety | |||||||||||
| Risk group according to CEI EN 62471:2010 | Risk group 2 | ||||||||||