Optical Imaging Technologies for Machine Vision
By: Opto Engineering
Optical Imaging Technologies for Machine Vision
Opto Engineering : LTVTBENCH
Specifications
| Lighting specifications | |||||||||||
| Illumination area diameter | (mm) | 40 | |||||||||
| Optimal working distance | (mm) | 5-25 | |||||||||
| Number of LEDs | 15 | ||||||||||
| Light color, peak wavelength | white, 6000 K | ||||||||||
| Spectral FWHM | (nm) | – | |||||||||
| Illuminance (1) | (klux) | 490 | |||||||||
| Number of LEDs | 18 | ||||||||||
| Light color, peak wavelength | white, 6000 K | ||||||||||
| Spectral FWHM | (nm) | – | |||||||||
| Illuminance (1) | (klux) | 5 | |||||||||
| Diffuser | yes | ||||||||||
| Electrical specifications | |||||||||||
| Power supply mode | Strobe only, constant current driving | ||||||||||
| Peak power consumption | (W) | n.a. | |||||||||
| Min pulse current | (A) | 3.5 | |||||||||
| Max pulse current | (A) | 7.5 | |||||||||
| Min pulse current | (A) | 3.5 | |||||||||
| Max pulse current | (A) | 17.0 | |||||||||
| Max pulse duration (2) | (ms) | 1 | |||||||||
| Max duty-cycle | (%) | 1.5 | |||||||||
| Estimated MTBF (3) | (hours) | > 50000 | |||||||||
| Connector | M8 | ||||||||||
| Cables | 4x CBLT003 included | ||||||||||
| Mechanical specifications | |||||||||||
| Aperture diameter | (mm) | 48.0 | |||||||||
| Length | (mm) | 600.0 | |||||||||
| Width | (mm) | 100.0 | |||||||||
| Height | (mm) | 155.5 | |||||||||
| Mass | (g) | 4000 | |||||||||
| Clamping system | 4x M6 threaded holes | ||||||||||
| Environmental specifications | |||||||||||
| Operating temperature | (°C) | 0-40 | |||||||||
| Storage temperature | (°C) | 0-50 | |||||||||
| Operating relative humidity | (%) | 20-85, non condensing | |||||||||
| Installation | Indoor use only | ||||||||||
| Eye safety | |||||||||||
| Risk group according to CEI EN 62471:2010 | Exempt | ||||||||||