Analog Frame Synchronizer & TBC
By: FOR-A
Video and Audio Systems for Broadcast Post-Production, and Professional Video
FOR-A : UFM-115TBC
Description
The FOR-A UFM 115TBC is a module-type FS/TBC that can be installed in the UFM frame. Noise reduction and cable compensation functions are available for the UFM115TBC.
Features
→ Analog composite 1 input 2 outputs.→ Composite Input / Output for easy integration into current available system.
→ Digital recursive motion adaptive noise reducer for improving the picture quality.
→ Hot-swap function allows boards to be removed and inserted even when the power is on.
→ Can be mounted on two different frames (casings) --UF-106A, UF-112--according to the system size.
Specifications
| Internal 4 | 2:2 Component processing and Digital Encoder/Decoder ensure high quality and stable signal output. |
| Video Formats | NTSC or PAL (Auto detect) |
| Video Input | Analog composite = 1.0 Vp-p 75Ω BNC x 1 |
| Genlock Input | NTSC = 0.429 Vp-p/PAL = 0.45 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.) |
| Video Output | Analog composite = 1.0 Vp-p 75Ω BNC x 2 |
| Processing | 4:2:2 component |
| Correction Range | 2 fields (field inversion prevented) |
| Sampling Frequency | Y = 13.5 MHz; C = 6.75 MHz |
| Quantization | 8-bit |
| Frequency Response | 100 kHz - 4.2 MHz = -0.5 dB - 0.5 dB, 4.2 MHz - 5.0 MHz = -1.0 dB - 1.0 dB, roll off above 5.0 MHz (NTSC); 100 kHz - 5.0 MHz = -0.5 dB - 0.5 dB, 5.0 MHz - 5.5 MHz = -1.0 dB - 1.0 dB, roll off above 5.5 MHz (PAL) |
| S/N Ratio | 56dB (no quantization noise) |
| K Factor (2T pulse) | Less than 2% |
| H/V Tilt | Less than 1% |
| Residual Jitter | Y = ±15 ns; C = ±2° |
| Proc Amp | Video Level = -3 dB to 3 dB; Chroma Level = -3 dB to 3 dB; Setup Level = 0 IRE to 15 IRE; Chroma Phase = -30° to 30° |
| Genlock Phase Control | H Phase = -2 µs to 2 µs |
| Interfaces | Remote = BNC x 1 (Freeze control, make contact) |
| Cable Equalization | 0 m to 250 m (5C-2V or equivalent) |
| Temperature | 10°C to 40°C |
| Humidity | 30% to 90% (no condensation) |
| Power | Supplied from UFM frame, 12 V DC ±10 % |
| Consumption | 900 mA |
| Dimensions | 106 (W) x 303 (D) mm (Front board); 106 (W) x 66.1 (D) mm (Rear board) |
| Weight | 0.5 kg |
| Slot Requirement | 1 slot |
| Accessories | Operation manual |
| Require Slots | 1 slot |