Composite, Y/C and Component Input and SDI Output A/D Converter
By: FOR-A
Video and Audio Systems for Broadcast Post-Production, and Professional Video
FOR-A : UFM-100ADC
Description
The For-A UFM-100ADC is a module-type AD converter that can be installed in a UFM frame. Analog composite, Y/C, and analog component input can be converted to SD-SDI for output.
Features
UFM-100ADC features include:
- Includes analog composite, Y/C, and analog component input.
- Two SD-SDI outputs.
- Adjustment of luminance level, chroma level, and chroma phase.
- Reference signals can be input from a UFM frame or rear module.
Specifications
| Video Formats | NTSC (525/60), PAL (625/50) (Auto detect) |
| Video Input | Selectable using dipswitch |
| Analog composite: 1.0 Vp-p 75Ω BNC x 1 | |
| Y/C: Y: 1.0 Vp-p, C: NTSC: 0.286 Vp-p /PAL: 0.3 Vp-p 75Ω BNC x 1 | |
| Analog component Y: 1.0 Vp-p, R-Y/B-Y: 0.7 Vp-p 75Ω BNC x 1 (Betacam level or SMPTE/EBU level) | |
| Reference Input* | NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p 75Ω BNC x 1 (Also signal input from UFM frame) |
| Video Output | SD-SDI 270 Mbps, 75Ω BNC x 2 |
| Quantization | 10-bit |
| Sampling Frequency | Y: 13.5 MHz, C: 6.75 MHz |
| I/O Delay | Max. 1 frame |
| Frequency Response | 100 kHz to 5 MHz: ±0.4 dB, roll off above 5 MHz (NTSC) 100 kHz to 5.5 MHz: ±0.4 dB, roll off above 5.5 MHz (PAL) |
| S/N Ratio | Over 56 dB (Composite) |
| DG/DP | 2% / 2º (APL: 50%) |
| K-factor (2T pulse) | 1% |
| Process Amp | Luminance Level: -3 dB to +3 dB Chroma Level: -3 dB to +3 dB Chroma Phase: -30º to +30º |
| Temperature / Humidity | 10ºC to 40ºC / 30% to 90% (no condensation) |
| Power | Supplied from UFM frame, +12 V DC to +24 V DC |
| Consumption | 3.6 VA (3.6 W) |
| Dimensions | 106 (W) x 303 (D) mm (Front board) 108.5 (W) x 66.1 (D) mm (Rear board) |
| Weight | 0.5 kg |
| Require Slot | 1 slot |
| Accessories | Operation manual |
Resources & Documents
| ufm-100adc.pdf | Datasheet |