VITS Inserter/Generator
By: FOR-A
Video and Audio Systems for Broadcast Post-Production, and Professional Video
FOR-A : UFM-100VITS
Description
The FOR-A UFM 100VITS is a module-type VITS inserter that can be installed in the UFM frame. The UFM100VITS inserts internally or externally generated test signals or data patterns from line 10 to 23 in the vertical blanking period of the input program signal.
Features
→ Consists of an insertion module and signal generation module.→ Internally -generated test signals can be set as program output VITS signals.
→ Delete and pass functions available for the same lines as the insert function.
→ 3 inputs available for external VITS signals.
→ Input program signals can be used as through output without conversion.
Specifications
| Video Formats | 525/60 (NTSC) |
| Internal Generate Signal | 12-bit, 8 fsc (28.6 MHz) |
| Program Input | Analog composite = 1.0 Vp-p, 75Ω, BNC x 1 (w/ bypass function) |
| External Input | Analog composite = 1.0 Vp-p, 75Ω, BNC x 3 |
| Program Output | Analog composite = 1.0 Vp-p, 75Ω, BNC x 1 (w/ bypass function) |
| Program monitor Output | Analog composite = 1.0 Vp-p, 75Ω, BNC x 1 |
| BB Output | Analog composite = 0.429 Vp-p, 75Ω, BNC x 3 |
| Frequency Response | ±2% (for up to 5.5 MHz), ±5% (for up to 10 MHz) |
| Chrominance-to-luminance Gain | Less than 1% |
| Chrominance-to-luminance Delay | Less than 5 nsec |
| DG / DP | Less than 0.3% / Less than 0.3° |
| HV Tilt | Less than 1% |
| DC Output Level | 0 V ±10 mV |
| S/N Ratio | Better than 60 dB |
| I/O Delay | 11.3° (±1°), Approx. 8.8 nsec |
| Temperature | 10°C to 40°C |
| Humidity | 30% to 90% (no condensation) |
| Power | 12 V DC to 24 V DC ±10% |
| Power Consumption | 7.1 W, 12 V DC = 590 mA, 24 V DC = 300 mA |
| Dimensions | 106 (W) x 303 (D) mm (Front board); 108.5 (W) x 66.1 (D) mm (Rear board) |
| Weight | 1.0 kg (2 module total) |
| Require Slot | 2 slots |
| Accessories | Operation manual |