Nitek : POE48
Description
The Nitek Power over Ethernet Card POE48 series 4 channel PoE crossover and power insertion card is designed for use with the CX254 and the CX452 modular card cage (purchase separately).
The POE48 crossover and power insertion card is a unique component of the UTPLinks system. The POE48 card can provide power for up to four PoE cameras. The POE48 also provides the means to connect the four IP cameras to a network device; i.e. hub, switch, etc. Up to five POE48 cards may be plugged into a CX254 or the CX452 chassis to power a total of twenty cameras, or any combination of. In this way the UTPLinks system may be used to power and crossover both IP and standard analog cameras in the same structured cabling network. The CX254 and the CX452 are 1 RU card cages (purchase separately).
Features
POE48 features include:
- The POE48 can be used in a combined system with standard UTPLinks plug-in cards
- Provides four separately fused outputs
- Interfaces with standard network devices
- Plug-in cards also provide future system ease of moves, adds and changes
- Detection LEDs for power
- TIA/EIA 568B compatible
- One Cat 5 or better cable per camera drop
Specifications
| Size | 1 horizontal card slot (5 slots total CX452 card cage) |
| Power Requirements | Supplied by PS115 power supply |
| Power Output | 48VDC @ 15.4 WATTS/PORT |
| Twisted Pair Connection (vertical runs) | RJ45 connector |
| Twisted Pair Connection (horizontal runs) | RJ45 connector |
| UTP Cable | Category 5 or better |
| Temperature Range | 0 degrees C to 55 degrees C |
| Humidity Range | 0 to 95%, non-condensing |
| Shipping Weight | 1 lbs |
Resources & Documents
| poe48_spec.pdf | Datasheet |