JAI : AD-080GE
Description
The AD-080GE is a multi-spectral 2 channel CCD camera. It simultaneously captures visible and near-ir through the same optical path.
30FPS, GigE
Features
→ AD-080GE Multi-spectral 2-channel CCD camera
→ Advanced series 2 x 1/3" progressive scan camera
→ Simultaneously captures Visible and Near-IR through the same optical path
→ 1024 (h) x 768 (v) active pixels per channel
→ 4.65 µm square pixels
→ 30 frames/second with full resolution
→ Increased frame rate with partial scan
→ Programmable exposure from 20 micro s to 33 m s
→ Pre-select and Pulse width trigger modes
→ LVAL Synchronous/-asynchronous operation (auto-detect)
→ LUT (Look-up Table)
→ AGC (Automatic Gain Control)
→ Auto-iris lens video output allows a wider range of light
→ RGB 24-bit/30-bit or Raw Bayer 10 or 8-bit output for visible
→ 12, 10 or 8-bit output for Near-IR
→ Sequence trigger mode and Frame delay trigger mode
→ SDK for Windows XP/Vista
Specifications
| Sensor, Visible | 1/3" color Bayer mosaic IT CCD |
| Sensor, Near-IR | 1/3" Monochrome interline transfer CCD |
| Pixel Clock | 33.75 MHz |
| Frame rate full frame | 30 frames/sec. |
| Active area | 4.76 (h) x 3.57 (v) mm |
| Cell size | 4.65 (h) x 4.65 (v) micro m |
| Active pixels | 1024 (h) x 768 (v) |
| Color visible | Raw Bayer output, or RGB 24-bit, 30-bit |
| Read-out modes, Full | 1024 (h) x 768 (v) 30 fps |
| Read-out modes, 1/2 partial scan | Scan height 8~768L, Start line 1~760L, (Bayer color 2 lines step) |
| Sensitivity, Visible | 0.5 Lux (On sensor, max. gain, shutter off, 50% video) |
| Sensitivity, Near-IR | 1.0 micro W/cm2 at 800nm (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >54dB (Gain 0 dB, shutter off) |
| Video output, Visible | 30/24-bits RGB or raw Bayer output |
| Video output, Near-IR | 8, 10, or 12-bit |
| Auto-iris lens video | 0.7 Vp-p |
| Gain | -3dB to 21dB |
| Synchronization | Int. X-tal |
| Inputs | Hirose 12-pin: OPT x 2, Hirose 6-pin: TTL x 2, LVDS x 1 |
| Outputs | Hirose 12-pin: OPT x 2, Hirose 6-pin: TTL x 1 |
| Trigger modes | Edge Pre-select, Pulse Width control, RCT, Frame delay, Sequence |
| Electronic shutter, Auto shutter | 1/30 to 1/10000 sec |
| Electronic shutter, Programmable exposure | 20 micro s to 792L (33.3ms) in 1L step |
| Electronic shutter, Exposure Time (Abs) | micro sec - user definable. Same range as PE |
| Electronic shutter, Pulse Width Control | Max. 2 sec (fine setting with GPIO and pulse width control) |
| White balance | Only RGB 24-bit and 30-bit output; Gain range: -3dB to 6dB; Manual: 3000K to 6500K; One-push: 3000K to 6500K; Continuous: 3000K to 6500K |
| Knee function | For 24-bit/30-bit output (visible) Near-IR 8, 10 or 12-bit, Knee point, Knee slope |
| LUT/Gamma | 1.0/0.6/0.45/LUT |
| Control interface | Register based, GigE Vision |
| Functions controlled via GigE Vision interface | Gain, shutter, trigger modes, read-out modes, bit depth, black level, GPIO, ROI |
| Indicators on rear panel | LED for power/trigger input GigE link, GigE activity |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 80% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 80% |
| Vibration | 3 G (20Hz to 200 Hz XYZ) |
| Shock | 50G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12-24V DC ± 10%. 7 W |
| Lens mount | C-mount (use 3CCD type with no IR filter) |
| Dimensions (H x W x L) | 55(H) x 55(W) x 98.3(D) mm |
| Weight | 320 g |
Resources & Documents
| ad-080ge.pdf | Datasheet |