1 x 8 Analog Composite Distribution Amplifier
By: FOR-A
Video and Audio Systems for Broadcast Post-Production, and Professional Video
FOR-A : UFM-18VDA
Description
The For-A UFM-18VDA is a module-type analog video distributor that can be installed in a UFM frame. It can distribute one video signal input into eight outputs. They are also equipped with an input signal relay bypass function.
Features
UFM-18VDA features include:
- Analog video distributor for distributing one video signal input into eight outputs.
- Gain control can be made from the front.
- Input signal bypass output function.
- Internal settings can be used to set loop-through for video input.
Specifications
| Video Input | Analog composite: 1.0 Vp-p 75Ω or high-impedance loop-through BNC x 1 |
| Video Output | Analog composite: 1.0 Vp-p ±0.3 dB 75Ω BNC x 8 (x 7 at Input loop-through) |
| Output Gain Range | ±3 dB for input signal |
| Output DC Offset | ±10 mV (at clamp), ±50 mV for input signal (at DC couple), OFF clamp, AC couple output |
| Frequency Response | 100 kHz to 12 MHz ±0.3 dB (100 Hz base) |
| K-factor | Less than 1% |
| DG/DP | Less than 0.5% / 0.5º (NTSC/PAL) |
| S/N Ratio | Better than 60 dB(p-p/rms) |
| Temperature / Humidity | 10ºC to 40ºC / 30% to 90% (no condensation) |
| Power | Supplied from UFM frame, +12 V DC to +24 V DC ±10% |
| Power Consumption | 2.9 VA (2.9 W), +12 V DC: 0.24 A, +24 V DC: 0.12 A |
| Dimensions | 106 (W) x 303 (D) mm (Front board) 108.5 (W) x 20 (H) x 66.1 (D) mm (Rear board) |
| Weight | 0.5 kg |
| Require Slot | 2 slots |
| Accessories | Operation manual |
| Option | UFHM-IFB: SNMP Interface card |
Resources & Documents
| ufm-18vda.pdf | Datasheet |