Hitachi : KP-FD83GV
Description
The Hitachi KPFD83GV is single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for XGA format of 1/3-inch which adopted the RGB primary color mosaic filter. By adoption of a Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, using hub or switcher, construction of multiple camera system can be easily performed.
The Hitachi KP FD83GV 1/3-inch 800,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high resolution and high color fidelity of 1024(H) x 768(V) (XGA). High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. Cable length can be extended to maximum 100m without hub and switcher. Based on industrial camera interface standard GigE Vision, a maximum of 1 Gbps high
speed data transmit is available and suitable for image processing. An external trigger signal input can be used to capture an image at desired timing for instant view or processing. The software trigger via a Gigabit Ethernet cable and the hardware trigger can deal with all trigger signals.
Specifications
| Imaging device | 1/3-inch progressive scan interline CCD (with on-chip microlenses) |
| Total number of pixels | 1077(H) x 788(V) |
| No. of effective pixels | 1034(H) x 779(V) |
| Unit cell size | 4.65(H) x 4.65(V) um (Square pixel) |
| Color filter | RGB primary color mosaic filter |
| Scanning system | Progressive scan |
| Frame rate | 36 fps (for all image format) |
| Sync system | Internal / external |
| Lens mount | C mount |
| Interface | Gigabit Ethernet |
| Protocol | GigE-Vision compliant |
| Transfer rate | 1 Gbit per second |
| Image format | RGB24/30bit,YUV (4:2:2) 8/10bit, Mono 8/10bit, Raw 8/10bit |
| Image size | 1024(H) x 768(V) |
| External sync signal | VD output 5Vp-p plus minus 0.3V; Strobe out 5Vp-p plus minus 0.3V |
| Standard sensitivity | 2000 lx F5.6 |
| Electric shutter speed | Auto (AES) / Manual (VARIABLE); From 10 second to approx. 1/100,000 second |
| External trigger shutter | Mode: Fixed shutter; One trigger; VD Sync |
| Input | Via Gigabit Ethernet cable (Software trigger); 12-pin connector (Hardware trigger) |
| Input level | 5Vp-p plus minus 1V |
| Auto Exposure (ALC | Auto level control): Adjustable for video level |
| Gain | Auto / Manual (0dB to 18dB) |
| White balance | ATW / MANUAL / One-push |
| Gamma | OFF / ON |
| Color saturation | Adjustable |
| Sharpness | Adjustable |
| Brightness | Adjustable |
| Power supply | DC 12V plus minus 1V |
| Power consumption | Approx. 4.1W (DC 12V) |
| Ambient temperature - Operating | -10 °C to 50 °C / 30 to 80 %RH |
| Note | If operated continuously, be sure to use at less than 40 °C(104F) for long term stable performance. |
| Storage | -20 °C to 60 °C / 20 to 90 %RH |
| Vibration endurance | 68.65 m/s2 or less (10 to 200Hz, 30 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.) |
| Shock endurance | 490.3 m/s2 or less (vertical, horizontal, once each face) |
| External dimensions | 44(W) x 29(H) x 72(D) mm (not including lens and protrusions) |
| Mass | Approx. 140g (without lens) |
| Camera remote | Gigabit Ethernet control |
| Supplied equipment | Camera; CD-ROM (Operation manual / Driver soft) |
| Optional accessories | LAN cable (Enhanced category 5 or Category 6) |