SXGA Color Gigabit Ethernet Camera

The Hitachi KPFD140GV is single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for SXGA format of 1/2-inch which adopted the RGB primary color mosaic filter. By adoption of a Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by daisy chain, construction of multiple camera system can be easily performed.

The Hitachi KP FD140GV 1/2-inch 1,450,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high resolution and high color fidelity of 1360(H) x 1024(V) (SXGA). High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. Cable length can be extended to maximum 100m without hub and switcher. Based on industrial camera interface standard GigE Vision, a maximum of 1 Gbps high speed data transmit is available and suitable for image processing. An external trigger signal input can be used to capture an image at desired timing for instant view or processing. The software trigger via a Gigabit Ethernet cable and the hardware trigger can deal with all trigger signals.

Imaging device	1/2-inch progressive scan interline CCD (with on-chip microlenses)
Total number of pixels	1434(H) x 1050(V)
No. of effective pixels	1392(H) x 1040(V)
Unit cell size	4.65(H) x 4.65(V) um (Square pixel)
Color filter	RGB primary color mosaic filter
Scanning system	Progressive scan
Frame rate	30 fps (for all image format)
Sync system	Internal / external
Lens mount	C mount
Interface	Gigabit Ethernet
Protocol	GigE-Vision compliant
Transfer rate	1 Gbit per second
Image format	RGB24/30bit,YUV(4:2:2) 8/10bit, Mono 8/10bit, Raw 8/10bit
Image size	1360(H) x 1024(V)
External sync signal	VD output: 5Vp-p plus minus 0.3V
Strobe out	5Vp-p plus minus 0.3V
Standard sensitivity	2000 lx F5.6
Electric shutter speed	Auto (AES) / Manual (VARIABLE); From 10 second to approx. 1/100,000 second
External trigger shutter	Mode: Fixed shutter; One trigger; VD Sync
Input	Via Gigabit Ethernet cable (Software trigger); 12-pin connector (Hardware trigger)
Input level	5Vp-p plus minus 1V
Auto Exposure (ALC	Auto level control): Adjustable for video level
Gain	Auto / Manual (0dB to 18dB)
White balance	ATW / MANUAL / One-push
Gamma	OFF / ON
Color saturation	Adjustable
Sharpness	Adjustable
Brightness	Adjustable
Power supply	DC 12V plus minus 1V
Power consumption	Approx. 4.1W (DC 12V)
Ambient temperature - Operating	-10 °C to 50 °C / 30 to 80 %RH
Note	If operated continuously, be sure to use at less than 40 °C(104F) for long term stable performance.
Storage	-20°C to 60 °C / 20 to 90 %RH
Vibration endurance	68.65 m/s2 or less(10 to 200Hz, 30 minutes each on XYZ axes)(Do not subject to strong vibration for long periods of time.)
Shock endurance	490.3 m/s2 or less (vertical, horizontal, once each face)
External dimensions	44(W) x 29(H) x 72(D) mm (not including lens and protrusions)
Mass	Approx. 140g (without lens)
Camera remote	Gigabit Ethernet control
Supplied equipment	Camera; CD-ROM (Operation manual / Driver soft)
Optional accessories	LAN cable (Enhanced category 5 or Category 6)