
NVT : NV-704J-PVD
Description
Typically installed in the Wiring Closet or IDF room, the NVT Cable Integrator NV-704J-PVD is a passive pass-through wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.
Power, video and data are converted at the camera using a PVD TM transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera’s signals to the NV-704J-PVD. Up to four cameras are supported. The NV-704J-PVD receives low-voltage camera power from any third-party Class 2 power supply. Control Room video connections are achieved with a single 4-pair RJ45 cable. P/T/Z telemetry data, if required, passes through a second 4-pair RJ45 cable and delivers P/T/Z telemetry. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts .
Features
NV-704J-PVD features include:
→ Connectivity for up to four cameras, each via a single RJ45 4-pair cable
→ Use with the NV-216A-PV or NV-218A-PVD tranceivers or the NV-226J-PV transmitter at the camera
→ Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Chart)
→ Cable-management solution from the camera to the Wiring Closet and on to the Control Room
→ Wall-mountable; rack-mountable using the NV-RM8/10 panel
→ Limited lifetime warranty
Specifications
Control UTP, RJ45 Connectors | 100 ohms |
Temperature | -22 to 167 °F (-30 to 75 °C) |
Humidity (non-condensing) | 0 to 95% |
Video UTP, RJ45 Connectors | 100 ohms |
Power | 16 to 24AWG (0.5mm to 1.3mm) |
Dimensions, excluding brackets and connectors | 7.3in x 2.35in x 1.65in (184mm x 60mm x 41mm) |
Material | Black ABS |
Mounting | Two 0.175in (4,4mm diameter holes) 6.75in (171,5mm) apart |
Product Weight | 0.6lb (0.32kg) |
Packaged Weight | 0.6lb (0.32kg) |
Resources & Documents
nv-704j-pvd.pdf | Datasheet |