Cantronic : IA123
Research And Development MWIR HIGH SENSITIVITY IR IMAGING CAMERA
THIS MANUFACTURER HAS BEEN DISCONTINUED
Description
The IA 123 uses an InSb 640×512 IRFPA detector operating in the middle infrared wavelength region (MWIR). IA-123 cameras are normally used with a Windows 2000 or XP PC for control, image display and other advanced features through a command and data link. However the IA123 can also be integrated into an user痴 own system. The IA123 can be controlled with a basic control/configuration software, and can also run optional advanced RTS 1000 thermography software featuring live display and real-time storage.
With control software, you can configure the camera’s frame size and rate, integrating time, NUC & PR (bad pixels replacement), gain and offset control. Also the image captured by the camera can be displayed and stored on PC through RS232 link and/or CamLink.
RTS1000 is a very useful software to generate live display and real time storage with real time board. The software has many functions for display, analysis and store images captured by the IA123 camera.
Image can be directed to the PC VGA screen or to a CCIR/RS170 video monitor (such as a LCD monitor). When using the VGA display mode, the image is presented on a window under the RTS1000 program (optional). Real time tools such as spot, profiles, histograms etc. are available on the live image. The video image is compatible with either CCIR 50 Hz or RS170 60 Hz.
Features
→ The nominal aperture is F/2 or F/4. The average optical transmission is > 90% on the full wavelength.Specifications
Sensor | InSb IRFPA |
Resolution | 640 x 512 pixels with random window in mode |
Pitch | 15 μm |
Wavelength | 3.6 - 5 μm |
Image Mode | Snap shot |
Cooling/MTBF | Stirling cooler /7,500 hours |
Full Frame Rate | Programmable standard 1 to 60 Hz up to 120 Hz with high frame option |
Integration Time | Programmable (from 3 μs to 20ms ; Typ. 1.7ms/min. step: 1μs) |
A/D Conversion | 14 bits |
NETD | 25 mK at 25°C |
F Number | Standard F/4 or F/2 (Optional) |
System Control | From a remote computer, Windows 2000 and XP |
Video Output | CCIR or RS 170 1 Vpp to 75 ohms, digital video RS422 |
NUC Table | 3 tables full frame |
AGC Algorithms | 3 tables full frame |
Size w/o Lens | 245mm(L) x 115mm(W) x 150mm(H) |
Weight w/o Lens | 2 KG |
Power Supply | 24VDC, 30W |
Operating Temperature | -20°C to 50°C |
Storage Temperature | -20°C to 70°C |
Vibration | 10 g during 6 ms in case of shock, 3 g RMS between 1 Hz at 500 Hz in random vibration, 2 g peak to peak between 1 Hz at 500 Hz in sine vibration |
The following lenses are available | F=25 mm, F=50 mm, F=100 mm, F=200 mm, F= 250 mm, 50 / 250 mm bifocal, Customized lenses (including zoom lenses) are available upon special request. |
Below are some of RTS1000 software's features | 1. Live image display 2. Digital Range and Level setup 3. Real time storage 4. Spot measurements 5. Profiles 6. Regions of interest 7. Temporal profiles 8. Color palettes 9. Image conversion to several image format 10. ASCII data generation 11. Radiometric calibration functions 12. Focal plane array calibration and characterization |
Standard Accessories | 1. Power supply module 80-240 VAC 50-60 Hz input, 24 V DC output 2. Rugged transport case AND user manual (CD-ROM Electronic Format) 3. Remote control Software 4. 50 mm MWIR manual focusing lens 5. 200 mm MWIR manual focusing lens 6. High Temperature Filter (Narrow 3.9 μm, 1'' diameter) 7. Three (3) Neutral Density Filters (1'' diameter) 1-5 μm 1%, 2%, and 10% 8. Two BandPass Filters (1” diameter), 2.6-2.9 μm, and 4.2-4.45 μm 9. Low Pass filter cut-off 3 μm AND High Pass filter cut-on 3 μm 10. Standard Calibration from 5°C to 100°C without filter for 1 lens 11. Standard Calibration from 100°C to 1500°C with either high temp or neutral density filter for 1 lens and 1 set of filter 12. 15 m Digital Data Cable AND 15 m Serial Communication Cable |