Hitachi : KP-FD140SCL
Description
The Hitachi KPFD140SCL is single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for SXGA format of 1/2-inch which adopted the RGB primary color mosaic filter. Progressive scan with full pixel independent readout and full frame shutter provide images of unparalleled quality at 30 frames per second non-interlaced output. Effective picture elements number 1.45 million, while the broad array of functions includes digital output, multi-step electronic shutter, and frame on demand etc. The square lattice pixel format also provides excellent suitability for image processing applications.
The Hitachi KP FD140SCL trigger and shutter can be used to capture an image at the desired timing and the accumulation time. The 1/2-inch 1,450,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high resolution and high color fidelity of 1360(H) x 1024(V)(SXGA). The frame shutter function improves vertical resolution of moving objects. The shutter speed can be selected in 8 steps from 1/30th second to 1/100,000th second. (Variable: 1/100,000th second(min), 10 second(Max)). An external trigger signal input can be used to capture an image at a desired timing for instant view or processing. The capture time can be adjusted by the trigger and shutter. Saturation and hue of primary color R, G, B and complementary colors Cy, Mg, Ye can be independently varied. It is effective at an application (Image capture, microscope, etc) needed highly accurate color fidelity.
Specifications
Imaging device | 1/2-inch progressive scan interline CCD (with on-chip microlenses) |
Total pixels | 1434(H) x 1050(V) |
Effective pixels | 1392(H) x 1040(V) |
Unit cell size | 4.65(H) x 4.65(V) um (square lattice) |
Color filter | RGB primary color mosaic filter |
Scanning system | Progressive |
Sync system | Internal |
Video output - Interface | Camera Link standard(SDR connector) |
Protocol | Base configuration(1ch:SDR connector x 1pc.); Medium /Full configuration; (2ch:SDR connector x 2pcs) |
Output format | (a) 24bits (R:8bits G:8bits B:8bits)(Base configuration/ Medium configuration);In 24bits mode, selectable 1ch/2ch by remote control. |
Output image size | 1392(H) x 1040(V) |
Frame rate | 30frames/second (full pixel readout) |
Horizontal drive frequency | 64 MHz |
Horizontal scanning frequency | 33.519 kHz |
Vertical scanning frequency | 30 Hz |
Camera remote | Camera Link control |
Sensitivity | 2000 lx, F8, 3200 K |
Minimum lamination | 5.0 lx, F1.4, MAX GAIN |
Gain | Auto/Manual (0 to 18.5dB)(Approx. 0.04dB step) |
VD reset | VD LVDS level, 30 Hz or less |
Electronic shutter speed | 1/30, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. Factory setting is off (1/60 second) or changeable by variable shutter (Minimum 1/100000 second) |
Frame on demand | Remote setting; Fixed shutter, one trigger and reset control mode; Factory setting is all off. |
Partial scan | Selectable start position and width of picture grabbing in 2H step. |
Auto Exposure (ALC | Auto level control): Adjustable for video level |
White balance | ATW / MANUAL / One-push |
Gamma | OFF / LUT |
Color masking | OFF / ON (6 vector independent masking) |
Color saturation | Adjustable |
Color level | Adjustable (Paint-black) |
Sharpness | Adjustable |
Brightness | Adjustable |
Lens mount | C mount (with Flange-back adjustment) |
Power supply voltage | 12 ± 1 VDC |
Current consumption | Approx. 340 mA (Approx. 4.1W) |
Ambient, operating | 0 to 40℃ ( 32 to ; 104 F), less than 90 % RH |
Ambient, storage | -10 to 50℃( 14 to 122 F), less than 70 % RH |
Note | If operated continuously, be sure to use at less than 40℃(104 F) for long term stable performance. |
Vibration endurance | 98 m/s2 (Acceleration: constant) |
Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right) |
External dimensions | 44 (W) x 44 (H) x 43 (D) mm (not including mount protrusions) |
Mass | Approx. 130 g (not including lens) |