Hitachi : KP-F80PCL
0.81 Megapixel Black & White Power Over Camera Link Industrial Camera
Industrial Video System & Broadcast
Description
The Hitachi KPF80PCL Monochrome Mini camera link camera has a square lattice pixel format that provides excellent suitability for image processing applications. The camera is a 1/3-inch size black and white CCD camera designed for high resolution and versatile functions.
The Hitachi KP F80PCL trigger and shutter can be used to capture an image at the desired timing and the accumulation time. It offers progressive scan with full pixel independent readout and full frame shutter provide image of unparalleled quality at 36 frames per second non-interlaced output. While the broad array of functions includes digital output, multi-step electronic shutter, and frame on demand etc. The square lattice pixel format also provides excellent suitability for image processing applications.
Specifications
| Imaging device | 1/3-inch interline CCD |
| Total pixels | 1077 (H) x 788(V) |
| Effective pixels | 1034 (H) x 779(V) |
| Pixel size | 4.65 (H) x 4.65 (V) um (square lattice) |
| Sensing area | 4.81 (H) x 3.62 (V) mm |
| Scanning system | Non-interlaced |
| Aspect ratio | 4 : 3 |
| Frame rate | 36frames/second (full pixel readout) |
| Horizontal scanning frequency | 28.346kHz |
| Vertical scanning frequency | 35.79 Hz |
| Sync system | Internal |
| Lens mount | C mount |
| Flange focal distance | 17.526 mm |
| Video output | Digital output Camera Link; Data : Base configuration 10bit x 1; Clk = 36.0000MHz |
| VD reset | VD LVDS level, 35.79 Hz or less |
| Resolution | Horizontal: 800TV lines; Vertical: 800TV lines |
| Sensitivity | 400 lx, F4, 3200 K |
| Minimum lamination | 1.0 lx, F1.4, MAX GAIN, without IR cut filter |
| Signal noise to ratio | 50 dB |
| Electronic shutter speed | 1/36, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. Factory setting is off (1/36 second) or changeable by variable shutter (Minimum 1/100000 second) |
| Gamma compensation | γ = 1 |
| Frame on demand | Remote setting (fixed shutter, one trigger and reset control mode). Factory setting is all off. |
| Partial scan | Selectable start position and width of picture grabbing from 1H to 768H by 1H step. |
| Power supply voltage | 12 ± 1 VDC |
| Current consumption | Approx. 160 mA |
| Ambient, operating | 0 to 40°C ( 32 to ; 104 F), less than 90 % RH |
| Ambient, storage | -10 to 50°C( 14 to 122 F), less than 70 % RH |
| Note | If operated continuously, be sure to use at less than 40℃(104 F) for long term stable performance. |
| Vibration endurance | 98 m/s2 (Acceleration: constant)(10 to 200Hz,sweep:10 min,XYZ,30 min) |
| Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions | 29 (W) x 29 (H) x 29 (D) mm |
| Mass | Approx. 50 g |