Altronix
Low Voltage Electronics and Power Solutions.
Showing 1–48 of 103 resultsSorted by latest
-
IP Access FACP Adapter
-
1 Output Outdoor CCTV Power Supply – 12VDC or 24VDC @ 6 amp, NEMA 4/4X
-
1 Output Outdoor CCTV Power Supply – 12VDC or 24VDC @ 4 amp, NEMA 4/4X
-
1 Output Outdoor CCTV Power Supply – 12VDC or 24VDC @ 2.5 amp
-
2 Output Outdoor CCTV Power Supply – 24VAC @ 12.5 amp or 28VAC @ 10 amp
-
2 Output Outdoor CCTV Power Supply – 24VAC @ 12.5 amp or 28VAC @ 10 amp
-
1 Output Outdoor CCTV Power Supply – 24VAC @ 7.25 amp or 28VAC @ 6.25 amp, NEMA 4/4X
-
4 Output Outdoor CCTV Power Supply – 24VAC @ 7 amp or 28VAC @ 6.25 amp
-
8 Output Rack Mount CCTV Power Supply – 6-15VDC @ 4 amp, PTC Class 2 power limited outputs
-
8 Output Rack Mount CCTV Power Supply – 6-15VDC @ 4 amp, fused Class 2 power limited outputs
-
8 Output Isolated Rack Mount CCTV Power Supply – 24VAC @ 12.5 amp
-
8 Output Rack Mount CCTV Power Supply – 24VAC @ 3.5 amp or 28VAC @ 3 amp, PTC Class 2 power limited outputs
-
8 Output Isolated Rack Mount CCTV Power Supply – 24VAC @ 12.5 amp
-
24 Output Rack Mount CCTV Power Supply – 10 amp total current, individually selectable 24VAC or 28VAC fused outputs
-
16 Output Rack Mount CCTV Power Supply – 10 amp total current, individually selectable 24VAC or 28VAC fused outputs
-
8 Output Rack Mount CCTV Power Supply – 5 amp total current, individually selectable 24VAC or 28VAC fused outputs
-
8 Output Rack Mount CCTV Power Supply – 24VAC @ 3.5 amp or 28VAC @ 3 amp
-
18 Output CCTV Power Supply – 12VDC @ 11 amp, PTC outputs, field installable grounded line cord
-
16 Output Isolated CCTV Power Supply – 24VAC @ 25 amp, isolated fused Class 2 power limited outputs rated @ 1.56 amp each
-
16 Output CCTV Power Supply – 12VDC or 24VDC @ 6 amp, fused outputs
-
32 Output CCTV Power Supply – 24VAC @ 14 amp or 28VAC @ 12.5 amp
-
16 Output CCTV Power Supply – 24VAC @ 28 amp or 28VAC @ 25 amp
-
8 Output CCTV Power Supply – 24VAC @ 12.5 amp or 28VAC @ 10 amp
-
32 Output CCTV Power Supply – 24VAC @ 14 amp or 28VAC @ 12.5 amp, fused outputs
-
16 Output CCTV Power Supply – 24VAC @ 28 amp or 28VAC @ 25 amp
-
8 Output CCTV Power Supply – 24VAC @ 28 amp or 28VAC @ 25 amp
-
Outdoor Video Surveillance UPS – twelve 24VAC true sine wave outputs rated @ 4 amp and four 12VDC regulated outputs rated @ 2 amp
-
HubWayDv eight (8) pack
-
Video Surveillance UPS – twelve 24VAC true sine wave outputs rated @ 4 amp and four 12VDC regulated outputs rated @ 2 amp
-
8 Channel Passive UTP Transceiver Hub with Integral Camera Power, Video/Data up to 750 ft.
-
4 Channel Passive UTP Transceiver Hub with Integral Camera Power, Video/Data up to 750 ft., 4 amp total current
-
16 Channel Active UTP Transceiver Hub with Integral Camera Power, Video/Data up to 3000 ft.
-
8 Channel Active UTP Transceiver Hub with Integral Camera Power, Video/Data up to 3000 ft
-
Active UTP Transceiver Hub. Allows video transmission of up to 16 cameras over four (4) Cat 5 cables
-
16 Channel Passive UTP Transceiver Hub with Integral Camera Power, Video/Data up to 750 ft
-
8 Channel Passive UTP Transceiver Hub with Integral Camera Power, Video/Data up to 750 ft.
-
Rack Mount Power Supply/Charger – two (2) 56VDC outputs rated @ 3 amp each
-
16-Port ethernet over coax receiver. Supports IP video/data over coax up to 1,500 ft.
-
4-Port ethernet over coax receiver. Supports IP video/data over coax up to 1,500 ft.
-
Ethernet over coax kit. Supports IP video/data over coax up to 1,500 ft.
-
4-Port Managed PoE/PoE+ Switch with Midspan Injector Kit
-
16 Port Midspan – each port provides PoE per IEEE 802.3af or PoE+ per IEEE 802.3at
-
8 Port Midspan – each port provides PoE per IEEE 802.3af or PoE+ per IEEE 802.3at.
-
Single Port Midspan PoE Injector 24VAC/24VDC operation – PoE compliant port is rated @ 15.4W IEEE 802.3af
-
Managed NAC Power Extender – 24VDC @ 10 amps, NAC outputs are selectable for 4 Class A
-
NAC Power Extender – 24VDC @ 10 amp. 2 – Class A or 4 – Class B NAC circuits
-
NAC Power Extender – 24VDC @ 8 amp. 2 – Class A or 4 – Class B NAC circuits
-
NAC Power Extender – 24VDC @ 6.5 amp, 2 – Class A or 4 – Class B NAC circuits